Electronics Forum | Wed Jul 10 16:34:23 EDT 2013 | hegemon
Preheating is critical in Vapor Phase Soldering. One trick that is done is to use the "soft vapor" area just above the soldering vapor, some machines can pause just before going into the soldering vapor. Using that pause above the vapor to continue
Electronics Forum | Mon Jul 29 08:34:40 EDT 2013 | gallionc
I don't see an issue. As was mentioned before, it is what the customer wants. You could approach this from one of two ways. You could simply install the parts, clinch the leads on the opposite side for added mechanical strength and solder the parts
Electronics Forum | Mon Jul 22 14:06:16 EDT 2013 | bobpan
I dont have a machine to look at but its one of 2 ways.... 1. It finds a home sensor then counts out to a position. 2. It finds an etched mark on the glass scale then counts out to a position from there. I know the Q-series machines does the second
Electronics Forum | Fri Aug 16 03:44:12 EDT 2013 | rollon65
Hi. Sorry I don't have an answer for this but I have the same problem in the "Y" axis on one of my 4Cs after the machine has run for around 4 hours. The machine seems to partially correct for the pick-ups being off as the placements are fairly good
Electronics Forum | Tue Jul 23 12:35:36 EDT 2013 | ceexchange
We are looking for service personnel that can work on our SMT related equipment prior to shipping to our global clientele. We have great technical personnel currently but it seems demand for our product has outpaced our current output capabilities.
Electronics Forum | Mon Aug 26 00:17:32 EDT 2013 | alexeis
Hi, After you got datasheets of component shapes (only new one) and enter it to SMT machine library (including Polarity Mark and Position), you can use our software to simulate and fix all angles. Also, our software has tools to add Polarity informa
Electronics Forum | Sat Aug 03 12:37:21 EDT 2013 | ercdave1
Hello, thank you for taking a few minutes to read my post. I am looking for someone that still have one of this machine to kindly help me. I have been using this machine to perform some testing on small quantity jobs. it works great but today I got
Electronics Forum | Thu Aug 08 04:54:35 EDT 2013 | alexeis
Hi, I want to add some clearance to my question that I didn't speak about preparing files for Samsung SMT machines. I am speaking about process of SMT carts preparation (offline) and process of SMT feeder/component replacing when it is on the SMT li
Electronics Forum | Mon Aug 19 10:25:19 EDT 2013 | jaimebc
Using ERSA Ecoselect. I am curiuos to hear from other selective solder users as to what is the ideal lead lenght for your application on thru hole components. Shorter leads have helped us decrease solder bridges. We find ours to be from .75 mm to 1
Electronics Forum | Wed Sep 04 11:37:30 EDT 2013 | trice1212
Afternoon SMTnet forum users, The Assembleon Opal-XII we use has been showing an error when ran at 100% speed. We talked to the tech in AZ and he believes we have a problem with our y-motors. We turned the speed down and haven't had the problem com
