Electronics Forum | Tue Sep 14 03:14:52 EDT 2004 | Adam
Hi Has anyone see a defect,where after one pass over the wave, pins on conectors seem to have a tenancy to have a mimimum solder fillet on the bottom-side of the board. There seems to be no trend, It could range from half a dozen to two dozen from b
Electronics Forum | Wed Feb 02 11:10:07 EST 2005 | jdengler
Hi AJ, I've never used the Flexa due to the price. We replaced our MCS with eSMT Software (web site http://www.esmt-software.com/). You might want to look at this if you don't need all of the Flexa features. We have older Fuji equipment (GSP's
Electronics Forum | Fri Mar 23 19:50:57 EDT 2007 | Frank
Possible head combinations to pick from multiple 12, 16, or 24mm feeders. Note: you can not mix feeder sizes for simultaneous picks. KE-2010 and KE-2050 will use 1&3, 2&4, or 1&4 KE-2020 and KE-2060 will use 1,3,R or 2,4,R or 1,4,R I prefer to s
Electronics Forum | Wed Aug 29 08:59:35 EDT 2007 | knutgaube
Servus! I am currently producing Low volume/high mix on Panasonic CM401-M using PanaPro. For optimzing changeover I am thinking about buying the PanaPro DSM module. We use a self made program at the moment, but it sure is rather a "bettering" than a
Electronics Forum | Fri Sep 19 06:02:34 EDT 2008 | jlawson
Not that trying to sell anything, but Valors new vPlan system is a scalable software that can read gerbers and other CAM/CAD formats, can extract component positions, add polarities prepare job with BOM import, verify CAD to BOM and generate Topax-X
Electronics Forum | Thu Feb 05 02:52:37 EST 2009 | sachu_70
The problem expressed by you need not necessarily be caused by the Reflow process even though it's effect cannot be ruled out. I suggest to validate periodically the Reflow Oven performance as also optimise Reflow parameters through a documented vali
Electronics Forum | Mon Mar 16 08:34:46 EDT 2009 | sachu_70
Hey Loco, how about saving the bottom side? It actually only depends on your oven setting specific to Top heaters and Bottom heaters. Unless you set the parameters rightly, you would face such issues. It only indicates that you need to seriously re-l
Electronics Forum | Mon Feb 20 20:28:04 EST 2012 | acsscott
Have you done any more work on this? I have a program that reads the Altium files, a feeder database,and makes a UFOS file for the older CSM machines. I can't get the UFOS to VIOS convertor on our Topaz X to read the UFOS *.BRD files. It stops and
Electronics Forum | Tue Jan 21 09:39:56 EST 2014 | spoiltforchoice
http://www.graphicode.com/GC-PowerPlace this does, I had a dabble and while it does seem quite capable the learning curve is quite steep and I'd wager the price is too. As with GCPrevue, the user interface is hardly what you would call streamlined or
Electronics Forum | Mon Nov 17 06:27:50 EST 2014 | garym4569
In the program editor on the machine, you can output a text file of the production data. You can select to output placement data, component data, and/or feeder setup for the product currently loaded on the machine. You can also do the same in the H
