Electronics Forum | Fri Jan 27 09:48:26 EST 2006 | patrickbruneel
GS UPS are exempt for 2 reasons: A. Lead in solders for servers, storage and storage array systems, network infrastructure equipment for switching, signaling, transmission as well as network management for telecommunications. B. The primary functi
Electronics Forum | Thu Jun 15 18:15:34 EDT 2006 | nickel
If you have time, download the free Practical Guide to Understanding the Scope of the WEEE and RoHS, you will find what they say about UPS. They consider UPS out from the field of application of RoHS. ORGALIME (Bruxelles)is the European Engineering
Electronics Forum | Mon Aug 05 09:16:39 EDT 2013 | valeriusx
Greetings. I'm having some difficulties in configuring 2 old SIPLACE Placement Machines - 80S-15 and 80F-3. They are already installed, there are no errors on machines computers, but I can't configure connection between these machines and the line c
Electronics Forum | Tue Jan 14 20:32:41 EST 2003 | davef
There's just about 4 beezillion companies that give solder training. Some are: * BEST Rolling Meadows, IL 847-797-9250 Bill Westmoreland (bwestmoreland@solder.net) http://www.solder.net/ * Circuit Technology 340 Raleigh St Holly Springs, NC 27540 (
Electronics Forum | Fri Feb 09 16:10:26 EST 2018 | wnb_peman
Hello everyone, We're a CM that utilizes both the Zenith AOI and 8030 SPI platforms. High mix, relative low volume so we're told by KY that our library is very large comparative to their other clients. Of all the SMT equipment we own, the KY softw
Electronics Forum | Mon May 08 05:23:03 EDT 2023 | akwinney5
Does anyone know the Service Engineer Passwords for the Juki FX-3 and KE3020 pick and place machines? I am trying to set these machines up to be networked and I need full access to the computer on these machines to make the appropriate changes.
Electronics Forum | Wed Mar 18 16:15:49 EDT 2020 | emeto
Katrina, if the machine will zero on its own, there is nothing wrong with machine itself. You can now look into network cards in both line computer and line PC.
Electronics Forum | Mon Mar 16 12:10:59 EDT 2020 | emeto
Katrina, it is one of both: 1. Communication error - try to initialize machine with line controller OFF. This should tell you if machine can initialize on its own and if the problem is on the machine. Try without the feeder carts, look at the cards
| 1 |
.gif)
