Electronics Forum | Wed Jul 17 08:21:10 EDT 2013 | ejurentkuff
My boss wants me to look into a 5DX or equivalent equipment. Right now I am in discovry mode. I need to know what's out there and the pros and cons. What type of support I'm going to need (programming, running, etc.) Cost/benefit. Any information
Electronics Forum | Tue Jul 30 12:06:20 EDT 2013 | JB
I've checked the sensors and they look ok, I'm guessing its the plc-program then. If you get it working i'd be interested in knowing how to do it to ours. Already checked with Nutek and the manual is quite expensive so I guess we'll do with out it.
Electronics Forum | Fri Jul 26 03:52:03 EDT 2013 | danyquintard
Hi We produce electronic pcboards for the aircraft industry. Some of our clients think that the thickness of the varnish left is proportional to the intensity of the blue color of uv's pigments in the varnish. Out off, we know that is not true. The
Electronics Forum | Tue Jul 30 07:29:06 EDT 2013 | scotceltic
We are currently experiencing thermal shock failure on a BGA package. We are currently looking at improvements to improve the thermal shock properties by using underfilm. I have seen some studies out there that use this process to improve drop test
Electronics Forum | Wed Sep 04 11:26:17 EDT 2013 | srgbarba
Hi, I'm trying to implement SMED metric at SMT area in order to improve our change over (CO) up to 10min in high mix low volume process, ant at this moment the start and end point is the inspection before the oven, and what I'm trying to figure out i
Electronics Forum | Fri Sep 06 12:34:00 EDT 2013 | bobpan
Your firmware is so old that the problem is not in the mod codes anyways. You have a problem with the cyberoptics head. If its not working at all, i would remove the lens assy on the front side where the cable plugs in and blow out the unit. Maybe if
Electronics Forum | Thu Sep 19 23:46:23 EDT 2013 | action_101
Reliability, number of machines in the field, you can pick up an older UIC GSM and it can easily handlrle 0603's and up. On top of that, any fine pitch or bga's and you'll be fine. Plenty of feedets out there too. Manncorp is as low as u can go. Very
Electronics Forum | Wed Oct 02 00:35:33 EDT 2013 | sonavc
thanks I tested the conveyor A or B , when it is on the motor turn and the green LED at the out put card is also light on. But when i turn on the X y table motor , the green LED is on , but the motor is not run. I will try to replace the I/O
Electronics Forum | Tue Oct 15 19:27:08 EDT 2013 | swag
See if you can get a sample of Dek's Nano Protek. We use it on all our fine pitch stencils. I'd say it's kind of like car wax for the aperture walls. They operators really like it a bug me every day to order more if we run out.
Electronics Forum | Thu Oct 17 12:01:09 EDT 2013 | pavel_murtishev
Gentlemen, Have no idea how to remove fully polymerized silicone elastomer resides from a particular product. Product housing has not been designed for filling. Having polymerized, elastomer (DowCorning SylGard 160)expands and gets out of filling ho
