Electronics Forum | Thu Jun 24 16:23:05 EDT 2004 | buki
I am working on my own tooling that has a gel interface for DS PCB's right now, for a lot less $$, it should work for a P&P and a printer with a little modification. I am hoping to get it early next week and try it out. I'll let you how it turns out.
Electronics Forum | Thu Jun 10 11:20:03 EDT 2004 | bbarr
I have been given a v-groove score keep out area dimension of 1mm from the edge of the groove to the component body; except the dimension becomes 5mm for ceramic components. 5mm seems like a very large value. Does anybody have experience with this? I
Electronics Forum | Thu Jun 10 20:20:30 EDT 2004 | M.L. Feather
Is there a way to have one nozzle on the HSP Chipshooter 4796 to use a higher force of vacuum than the other nozzles? For instance, an 8x4 embossed feeder has components that are wedged hard into the plastic and cannot be pulled out with regular vacu
Electronics Forum | Thu Jun 24 11:54:36 EDT 2004 | rickw
many solder-ball issues can be resolved by reducing the aperture size, usually 10 to 15% reduction will work. If the aperture size is the same as the pad size paste tends to be squished out under the part, paste off pad under the part will liquify a
Electronics Forum | Wed Jun 23 19:40:29 EDT 2004 | Deon Nungaray
Quick question for you Netters out there: Anyone out there dispense solder paste (via automated dispenser) for 0402, 0201 and/or uBGA's? If so, success yields, equipment used, and any technical info would be appreciated. This is for a low volume app
Electronics Forum | Tue Aug 03 22:49:19 EDT 2004 | celldude
SSD can be used on both sides of the pcb. Although , it is not very logical to use it on the bottom side of a pcb that has numrerous Through-hole components, that are to be wave soldered. There are many advantages to SSD. The amount of solder is much
Electronics Forum | Wed Aug 04 10:20:13 EDT 2004 | santech
I am looking for an inexpensive way to mark pcb's. Anyone out there got any ideas? I need to print out 2-5 characters on an array of 40-60 boards. currently using silk screens and an old screen printer, but I can see that in no time I will have ov
Electronics Forum | Fri Aug 20 12:06:53 EDT 2004 | danhui888
Pls contact ECD for built in monitoring system or KIC 24/7. This products will monitor your oven performance and profile round the clock without stopping. If your profile is out of the spec, the software will gives you an alarm and the machine will s
Electronics Forum | Fri Aug 20 12:06:55 EDT 2004 | danhui888
Pls contact ECD for built in monitoring system or KIC 24/7. This products will monitor your oven performance and profile round the clock without stopping. If your profile is out of the spec, the software will gives you an alarm and the machine will s
Electronics Forum | Thu Jan 06 16:11:07 EST 2005 | Chunks
It appears your board house is having a problem with the solder resist (mask). From the couple pix it appear that the holes are being plugged by the mask, so your HASL is not able to be blown out during the hot knife process. Time to call your boar