Electronics Forum | Tue Nov 29 12:23:58 EST 2005 | JeffP
>Anyone can do good airflow with a little brains, and so >>delta t is important, but not the main weakness I see on >>batch convection. Actually it is a main weakness with batch and small conveyer ovens on the market. There must be a lot of people
Electronics Forum | Tue Apr 25 21:29:08 EDT 2006 | TMC
Thanks for all the replies. Rob . . . that's what I was looking to get feedback on; to see if others can program their reflow ovens so that double sided boards only reflow on top during the second pass. Our oven does have an edge belt conveyer so t
Electronics Forum | Fri Jul 21 03:51:06 EDT 2006 | Rob
Hi CKH, Here's some things to consider: 1) Moved by obstruction in/entering oven, such as nitrogen skirts 2) Incorrect air pressure/air leak in oven (large surface area on component) 3) Reflow temperature too hot & electrolyte/air in cap is expandi
Electronics Forum | Mon Feb 12 11:12:16 EST 2007 | davef
Q1. After reflow some boards start producing bumps/bubbles which damage the internal layers causeing PCBs failed in Electrical-testing. How can I eradicate this problem from my assembling process? A1. Find a proper board supplier. Q2. If SMT compon
Electronics Forum | Tue Feb 27 12:16:19 EST 2007 | wavemasterlarry
hahaha! LISTEN, everyone knows that oven get dirty. They need periodic cleaning. So if you run lead boards thru your oven you will get lead dust and residue in you're oven. If you want to be truely lead free you need to get all the lead outta of
Electronics Forum | Tue Jan 29 15:28:36 EST 2008 | jmelson
Well, I don't know if you want to muck around this much, but I bought a GE (Chinese made, of course) toaster oven with convection fan. Nice big glass door in front, you can use it in bake, broil, toast or convection oven mode. The only thing missin
Electronics Forum | Fri Mar 05 08:06:39 EST 2010 | rgduval
Rob, Had that issue early on when we hooked up our Heller. For us, the problem turned out to be the serial communications port on the computer. I can't say we had the black screen, but, we had comm errors. I'd check the following: 1. Cable betwe
Electronics Forum | Wed Apr 28 18:29:25 EDT 2010 | jlawson
when I profile a customers oven / pcb I always > try a check to see if there is basic oven > temperature variation across its width....I have > to say that in my experience I have never seen > any significant variation on the Heller 1707EXL. > O
Electronics Forum | Fri Jul 02 10:30:35 EDT 2010 | kevslatvin
We used to use an APS Gold GF-120 before we went lead-free and the HT version came out. It worked fine for low volume and proto runs though not as much control over the profile as an oven with more zones. We actually had a batch oven from Bomir befor
Electronics Forum | Thu Nov 08 04:33:39 EST 2012 | grahamcooper22
Make sure that the 40 degree C oven is getting to less then 5% RH inside especially for any applications where you need to dry components....it may surprise you that many ovens set at 40 C will have an internal RH of @ 20~30%....and that is not dry e
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
4 Vreeland Rd.
Florham Park, NJ USA
Phone: 973-377-6800