Electronics Forum | Mon May 15 11:25:10 EDT 2006 | muse95
Since when is Hakko putting more plating on their tips? I was told that there was no change to their tips, it was the same tip for Pb or Pbfree. Prior to first use, all Hakko tips are Pbfree. We have been seeing those tips degrade quicker with Pbf
Electronics Forum | Mon Mar 11 16:27:11 EDT 2019 | charliedci
We have used both. They basically operated the same way, the discs are adjustable on the Hakko device as well. It also has a spring to help keep the IC's down on the flat bar. They both perform the same function.
Electronics Forum | Thu Jan 05 10:56:49 EST 2012 | davef
The high thermal mass of metal core boards makes them difficult to heat with hot air convection heating or IR. So, edge heaters are used for effective heating of heavy core circuit boards. Hakko and VJ Electronix offer edge heaters. We imagine othe
Electronics Forum | Fri Oct 03 16:51:06 EDT 2008 | waveroom
If this is a one time rework might I suggest farming it out? 100pin QFP can be taken off no problemo.. Putting it back down properly and then hand soldering??? I wouldn't want that job. You need excellent placement and imaging and your not going to
Electronics Forum | Tue Jan 11 19:38:44 EST 2011 | hegemon
There are a number of manufacturers of Benchtop Hot air stations. For what you are describing, look at Hakko as well as A.P.E. (if they are still around, they made a great little machine called a ?Chipmaster?, and if you added preheat, I think you
Electronics Forum | Fri Oct 14 03:50:08 EDT 2005 | steve
Alot of folks are going to experience this with their poorly designed desoldering systems. I would check the temperature that is being delivered at the tip of the desolder gun. A small preheater is recommended. The other problem you will encounter is
Electronics Forum | Wed Feb 18 09:27:22 EST 1998 | SMT-ASSY
Good morning Larry, SMT-ASSY offers training for PTH and SMT soldering and rework, moreover we also offer training such as the SMT process (using production equipment such Vitronics oven etc.), Design for manufacturing, Design guidelines and other bl
Electronics Forum | Thu Feb 19 00:31:55 EST 1998 | Larry
The type of training I am looking for is things like micro BGA, flipchip, COB, new processes and techniques, ect. I already work with things like fine pitch QFP's, high mix double reflowed boards every day. I live in Vancouver, but I can drive to Sea
Electronics Forum | Fri Aug 13 08:14:38 EDT 1999 | Peter Barton
| Ladies and Gentlemen, | | As a newly appointed DFM/CE "guru" here, one of my responsibilities has become repair (of course). As I have some knowledge of BGA repair/rework using semi-automated equipment, it naturally follows I would hav tremendous
Electronics Forum | Fri Aug 13 10:00:45 EDT 1999 | Boca
| | Ladies and Gentlemen, | | | | As a newly appointed DFM/CE "guru" here, one of my responsibilities has become repair (of course). As I have some knowledge of BGA repair/rework using semi-automated equipment, it naturally follows I would hav treme