Electronics Forum: packaging (Page 1 of 280)

Vacuum packaging

Electronics Forum | Fri May 19 08:05:23 EDT 2000 | David

We do a lot of prototype work, builds occur days or months apart and moisture Absorption in IC's is a worry. I would like to bake, chuck in some silica gel and then seal or vac seal in an envelope. Does anyone have any experience of vacuum sealing wa

MEM's style packaging

Electronics Forum | Fri Feb 04 15:14:19 EST 2000 | JDobos

Would like to make discuss the nature of MEM's style packaging with someone with experience in this area.

LED in paper packaging

Electronics Forum | Mon Jul 12 04:19:19 EDT 2010 | jepoy18

Hi All, Good day, Is there a Paper type packaging for LED 1608. Our available feeder in our production is for paper type but we are using emboss type reel packaging... thanks and regards.. Jeff

Raw PCB packaging

Electronics Forum | Wed Feb 22 16:29:55 EST 2006 | GS

Great job Davef, Thank you so much Best Regards..........GS

Raw PCB packaging

Electronics Forum | Mon Feb 20 16:31:09 EST 2006 | GS

Hello Gents, ..............several questions about the subject: Q1)Are there any standard regulating the subject ? Very few infos found on IPC. Q2)Which materials are suggested to seal (Bag) the PCB ? Q3)Is it necessary the vacuum sealed bag ? if

Re: Vacuum packaging

Electronics Forum | Tue May 23 21:03:18 EDT 2000 | Dave F

David: Beyond the information on sealing components in the archives, look for information on protecting boards. Further, consider a dessicant cabinet, as an alternative. Sources are also in the archives. Good luck. Dave F

IC packaging Specs

Electronics Forum | Sat Feb 28 14:00:18 EST 1998 | Gary Simbulan

I have run across reference to EIA-481 for specifications on Tape And Reel components for automatic placement and am looking for something similar that specifies standards or dimensions for IC Tubes or sticks. I am trying to make the vibatory feeder

Re: IC packaging Specs

Electronics Forum | Thu Mar 19 17:02:50 EST 1998 | TaeDong Park

I have run across reference to EIA-481 for specifications on Tape And Reel components for automatic placement and am looking for something similar that specifies standards or dimensions for IC Tubes or sticks. I am trying to make the vibatory feed

Raw PCB packaging

Electronics Forum | Wed Feb 22 08:31:42 EST 2006 | davef

Q1 Are there any standard regulating the subject? Very few infos found on IPC. A1 We�re unaware of standards for packing and storage for most types of boards. * IPC 4553 standard for Immersion Silver Finish, 3.8 Packing and Storage. * J-STD-033 and E

PWB packaging for shipment and storage

Electronics Forum | Wed Oct 20 10:41:22 EDT 1999 | Eric Lerz

Our company (assembler and user) has experienced some board problems relating to warpage and solderability. The manner in which they are packaged by our fabricators and stored in our stock prior to assembly has been questioned (as one of many factor

  1 2 3 4 5 6 7 8 9 10 Next

packaging searches for Companies, Equipment, Machines, Suppliers & Information