Electronics Forum | Tue Jul 27 16:44:31 EDT 1999 | Earl Moon
| | | Presently protos of micro-bgas (80i/o) pitch .030/.031 | | | 12BGA per assembly | | | | | | The board is a (.062, 4 layers) FR-4 using Dry film | | | Pads .014inch | | | Vias within footprint .020inch | | | Vias to be filled by bottom side(sol
Electronics Forum | Tue Jul 27 17:23:45 EDT 1999 | M.L
| | | | Presently protos of micro-bgas (80i/o) pitch .030/.031 | | | | 12BGA per assembly | | | | | | | | The board is a (.062, 4 layers) FR-4 using Dry film | | | | Pads .014inch | | | | Vias within footprint .020inch | | | | Vias to be filled by b
Electronics Forum | Fri Jun 18 10:46:10 EDT 1999 | Scott Cook
| | | first of all what is the technical term for the small amount of solder on a plated pad. we are getting poor screen printing gasketing on a 20 mil qfp due to this solder not being even or too high in spots and not covering the length of the pads
Electronics Forum | Thu Sep 24 10:19:55 EDT 1998 | Dave F
| i am working on a no-clean process implementation project in a company. i want to change a board to no-clean which had dendrite problems underneath the small resistors on the bottom side(in smt).i want more information on the exact cause of dendrit
Electronics Forum | Wed Sep 02 08:52:13 EDT 1998 | Justin Medernach
| | We are experiencing shorting on a BGA. The part has a 1mm pitch with a 196 I/O count. The problem seems to pop up without warning & disappear in the same manner. | | Our pad design is .020" diameter pads with .025" solder resist diameter. Th
Electronics Forum | Tue Sep 25 14:08:59 EDT 2001 | davef
Oooo, the solder on the pad and PGA ball is flowing during reflow down the via to the secondary side? Why didn�t you say so?? ;-) Why would you expect that gravity and capillary action wouldn�t force solder to flow down the solder plated via to the
Electronics Forum | Thu Sep 19 11:14:45 EDT 2002 | Jim M.
We had lots of problems with bridging on 15.8mm pitch, QFP17-160 at the start.The board was .032 thick, double sided-six boards to a panel. Here is the problems (not neccessarily in the biggest to little but as i remember them) and solutions that he
Electronics Forum | Fri Nov 05 10:59:30 EDT 2010 | methos1979
I have had my system for three weeks now. It is an MV3L. It is running version 4.5.0 build 2.1.2 software and it is very stable. I have not had a single crash. We are not a board manufacturer but rather use our system to inspect both populated an
Electronics Forum | Tue Dec 14 22:17:33 EST 1999 | Dave F
Armin: How ya doin� bud? CK gives good advice, but I'd like to take a bit of a different angle. Q1. For 0.7 mm (0.027in) diameter hole for vias, what�s the minimum annular ring for this hole diameter? Depends on what you�re trying to do. For in
Electronics Forum | Wed Jun 30 10:00:33 EDT 1999 | Mcox
| | | | | | | | snip | | | | | | | | | John and Dave, | | | | | | | | | | Again, I don't work with larger chip devices with this issue. The company I now work with developed a strategy, based on considerable research (as others of us did in the pa
PCB Electronics Manufacturing Automation Software for EMS, OEM & ODM manufacturers. Over 3000 customers worldwide!
116A Research Dr.
Milford, CT USA
Phone: (888) 486-4246
