Electronics Forum: panasonic msr (Page 1 of 2)

panasonic/CVT collation errors on MSR

Electronics Forum | Wed May 18 12:20:27 EDT 2005 | Tech

We have a panasonic MSR and keep getting collation errors and not sure how to remedy without shuttingdown machine and starting over. Any suggestions would help? Thanks.

Panasonic MSR Question

Electronics Forum | Fri Aug 17 09:42:18 EDT 2001 | Hussman

G'Day All, I have a couple of new Panasonic MSR's. Whenever I load a new program into the machine, I have to manually feed the first PCB onto the X/Y table to get it to run. After that, they run just fine. Panasonic is going to be in and they hav

0402 feeders

Electronics Forum | Wed Aug 02 17:19:49 EDT 2006 | flipit

Yes 0402 8X4 embossed feeders exist for Panasonic MSR, Universal GSM, Contact Systems, and Mimot for sure. In the old days of 0402 components, 0402 resistors used to come in 8X4 paper tape but now I think most 0402 resistors and capacitors come in 8

SMT Connector, Placement Issues

Electronics Forum | Fri Oct 10 17:27:10 EDT 2008 | wagoner

We have several similar parts in our factory and they usually don't give me any problem. One part has a 0.050 pin that goes into a 0.055 hole, and we place it with Panasonic MSR turret style chip shooter, which has a placement accuracy of only +/- 0


Electronics Forum | Wed Mar 21 13:39:11 EDT 2018 | tombstonesmt

I know this isn't a choice from what I'm reading, but we use to kill LED boards with an old Panasonic MSR. Our newer CM-602 and NPM could not beat the speed when you're talking about a max of 3 different part numbers; depending on binning. My .02 .

Cutting 24 mm Feeder Tape

Electronics Forum | Wed May 08 09:49:17 EDT 2002 | Hussman69

Hello, We are experiencing a little problem of cutting feeder tape. When ever we place two or more 24 mm feeders together, the cutter on the machine will partialy cut the adjoining tape, or pull it out of sequence. The machine is a Panasonic MSR,

Optimizer software for different brand of Pick and place equipme

Electronics Forum | Mon Aug 20 13:45:12 EDT 2007 | brulal1

We are low volume high mix, when we program the pick and place equipment we like to program and optimize several different PCB on the same set-up. We used to work with Panapro form Panasonic. I have and MSR, MPA 3F and Universal Advantis AX-72. Looki

Software compatibility between MSR and AX-72

Electronics Forum | Tue May 29 13:15:13 EDT 2007 | brulal1

Hi everyone you are upgrading our line, we already have and MSR HD 15 from Panasonic, we want to add and Advantis AX-72 form Universal. Panapro sotware don't have the option for the Advantis Ax72, so for now we have to used both software Panapro to g

Equipment for new SMT line (MYDATA?)

Electronics Forum | Mon Jun 23 13:01:54 EDT 2008 | wschulz

Hey guys, My company is currently looking into developing a SMT line. I have an interesting perspective on this due to the fact that I worked a SMT line for quite a few years as an equipment operator. Now I am an engineer and at a different company

Thinking of changing Pick and Place from Quads

Electronics Forum | Wed Dec 09 17:22:09 EST 2015 | tombstonesmt

I couldn't be more pleased with Panasonic. We've upgraded from MPAV's and MSR's to CM602/DT401 and now their NPM platform. NPM's are extremely fast and accurate. Their auto pickup position teach is great especially if you're running any 0402 2mm pit

  1 2 Next

panasonic msr searches for Companies, Equipment, Machines, Suppliers & Information

PCB Handling Machine with CE

Training online, at your facility, or at one of our worldwide training centers"
One stop service for all SMT and PCB needs

Nozzles, Feeders, Spare Parts - Siemens, Fuji, Juki, Yamaha, etc...
SMT feeders

High Speed Precision In-Line SPI System - Mirtec MS-11
SMT Machines

IPC Certification Training from the comfort of your home or office

MSD storage in desiccant dry canbinets