Electronics Forum | Fri May 01 00:27:12 EDT 2009 | rodrigo
Hi all, We had a servo amp replaced (SA-6) and the machine worked with no problem for the first panel (this panel of 10 only needs a TQFP100 from the MTU). Then I got the "Servo NG" error again. One of the servo paks showed a "7" on the LED. The err
Electronics Forum | Mon Sep 21 04:23:16 EDT 2009 | smtbox
R series Features FCS (Flex Calibration System) highly regarded easy maintenance just got even easier! The optional FCS calibration jig is a simple to use system to re-calibrate placement accuracy. The machine automatically picks and places jig comp
Electronics Forum | Tue Mar 16 18:36:11 EDT 2010 | janz
Looking for a large area wire ball bonder or > wedge bonder. Must be able to take 4" X 5" panel > and have a bond area of close to 3.5" X 4.4". > Also need 6 to 8 wire per second. K&S no longer > makes one. Panasonic no longer makes one. ASM
Electronics Forum | Fri Mar 04 19:38:44 EST 2011 | olddog
We are a very small (2 people) company and have recently purchased a used Quad 4c Mk II, for our low-volume in-house production. The machine appears to work perfectly for our needs. My question is regarding programming from a concept standpoint. Our
Electronics Forum | Fri Nov 25 15:52:40 EST 2011 | davef
"IPC-2221 - Generic Standard On Printed Board Design" talks to fiducials. Anther take on fiducials says they shall meet the following requirements. * Make fiducials 1 - 1.5 mm diameter circle. * Cover fiducials with tin. * Keep solder mask opening at
Electronics Forum | Mon Aug 27 11:51:47 EDT 2012 | cobham1
Its no my turn to give some advise. My first question would be can you put the boards into a carrier of some sort. There are many wonderful companies that make carriers that are ment for running down a smt line. This can be expensive unless you order
Electronics Forum | Tue May 21 09:06:03 EDT 2013 | hussman
Delta-T in reflow generally means 2 things - difference in temperature on a product or difference in temperature of your oven. Delta-T on a product is what are your hottest and coolest areas on the board. Larger parts toward the middle of the boar
Electronics Forum | Tue Jul 16 13:08:24 EDT 2013 | ericrr
I seem to of slipped into a mighty giant suction cup, and every day is the same. Now take yesterday as I was making a sample the start of run board, we have run many times. it got halfway placing diffused LED's 3216 (about 1207 size) then is stoppe
Electronics Forum | Fri Nov 21 12:12:44 EST 2014 | joe98375
On average there are about 3 parts per board that get hand placed (x24 is 72 parts per panel). One of these parts is a big 1W resistor that cannot fit on our axial machine. We also have a Zener Diode that needs to be hand placed because its leads are
Electronics Forum | Mon Jan 11 04:42:38 EST 2016 | buckcho
You can do the so called "Golden Sample" with defects from the process. The making of the defects on the board is very important to be as much close to the real ones from the production. How I do it - after the printer I remove paste on some pads, so