Electronics Forum | Wed Aug 15 14:12:49 EDT 2012 | hegemon
I saw a similar problem a couple years ago. In our case the issue was the original manufacture of the devices. The high temp spheres were misaligned from the beginning, and subjecting these parts to SMT reflow made the problem worse, and created is
Electronics Forum | Wed Aug 15 18:40:03 EDT 2012 | jdumont
Interesting Hege, however we xray 100% of these parts during our assembled PCB test process so I have to think this would have been caught seeing as this is not confined to one batch/year/upper level assy (same BGA, slightly different PCBs). That be
Electronics Forum | Mon Aug 20 16:33:09 EDT 2012 | cobham1
We check the resistors to value check them. We are using resistors that are not marked in any way shape or form. We also hand build everything so it is very possible to have our operators place the wrong part in the wrong spot. From a time point of v
Electronics Forum | Mon Aug 27 08:36:52 EDT 2012 | rway
The process is currently being performed by hand. > I am trying to automate the process by switching > to pick and place equipment and using > AOI. > > Problem number one is getting my customer > to sign off on switching from hand assembly to >
Electronics Forum | Sat Aug 18 10:06:05 EDT 2012 | cyber_wolf
There is no defined method that I am aware of. If your bulbs are old replace them. Other than that adjust the gain and offset until there is clear definition on the edges of the components. Keep an eye on the dump box.If the dump box stays relatively
Electronics Forum | Mon Aug 27 13:02:32 EDT 2012 | rway
We will look at the oven speed. We considered stiffeners but opted against that due to the risk of moving parts pre-reflow due to handling. 90 deg? I don't know. This may or may not help with the bowing. Considering there is little to no substra
Electronics Forum | Mon Aug 27 15:54:30 EDT 2012 | markhoch
I have a couple of places you can check. Cardinal Circuit www.cardinalcircuit.com and Enterprise Engineering (They're in Hungary) Enterprise Engineering KFT. Tünde utca 18. H-4400 Nyiregyhaza/ Hungary Tel. +36/ 70 425 1433 E-mail: enterprise.
Electronics Forum | Sat Sep 08 23:36:14 EDT 2012 | mtech88
Can anyone help me out this Fuji CP4 problem? I just move my machine to a new place, The feeding sensor error keep on poping up. but the mahine work on manual mode. When we switch to auto mode, it just to pick up the part and the machine stop on t
Electronics Forum | Wed Sep 26 14:18:50 EDT 2012 | tank
Wondering how good the software is for the Quad QSA 30 is. Is it a pain to program? We have panels with 100 boards... 1500 parts, I hope you don't have to manually teach the whole panelized board. Any other info you can provide is welcome. We
Electronics Forum | Thu Sep 27 05:47:21 EDT 2012 | bobpan
Check the software version before you buy it. If it is not version 6.75 do not buy it. This is the last version released for this machine and fixes many bugs that made running a panelized board a nightmare. 0603 parts and above is where i would stay