Electronics Forum | Tue Oct 16 18:00:52 EDT 2007 | jmelson
Oh, heh heh, I DO have the manuals for the III series of machines, including the spare parts manual. Maybe I can scan the detail of the drawing in question, and see if that looks like your machine. I can also get the exact model number range that m
Electronics Forum | Mon Oct 22 09:50:54 EDT 2007 | cyber_wolf
The true way to track feeder maintenance is through a real time bar code reading system...For example Bartector. (We have never used this system nor do we receive any benefit from them) We currently have our CP6 feeders set up on a three month inter
Electronics Forum | Mon Jan 07 13:09:35 EST 2008 | stevek
As I told you, some carriers (trays) are limited > to 75 degree maximum, and from time to time > employees do not pay attention to this. This is > one of the reasons. The second reason is that 90 > degree still be problematic in a case of rebake
Electronics Forum | Tue Apr 01 09:46:26 EDT 2008 | patsama_n
Thank you for kindness advice. From the result of IC after pass the reflow process. The color of letter will change to similar color of material compound of IC. Then when we inspection by AOI machine, we have many problem about high fault reject rate
Electronics Forum | Tue Sep 02 18:49:05 EDT 2008 | jlawson
Juki machines generally are great machines for reliablity and maintaining overall accuracy as they have full linear (mag-scales) encoders on XY axis and self calibration features. Laser centering has its pros and cons - mostly pros, but can have iss
Electronics Forum | Mon Sep 22 17:02:58 EDT 2008 | hegemon
You are on the right track Ismir. Essentially however, as the programmer of the machine, I am the one that creates the PCB with the errors to benchmark the settings for the machine. No secret lab though! :-) Easy enough for most any AOI machine to
Electronics Forum | Wed Jul 15 12:53:07 EDT 2009 | rwyman
Cabinets that utilize nitrogen or desiccator units are available that will accomodate the feeder so the parts don't need to be removed. Simply put the feeders into the cabinet at nite and remove them in the morning. Dr. Storage is one. A Google se
Electronics Forum | Mon Sep 21 20:45:55 EDT 2009 | davef
10.4. Pre-Cure Examination. Immediately after material application, the uncured conformal coating shall be examined for: a. Bubbles and Air Entrapments. These defects shall be broken by vacuum, with a sharp probe, or other appropriate tools. b. Bridg
Electronics Forum | Fri Oct 09 10:57:25 EDT 2009 | clampron
Omid, I have used the DRS24 for many years and have had similar problems with what you are talking about. I do not have any documents but I will tell you what I have seen. It sounds like an inconsistant collpse of the BGA. If one side of the BGA col
Electronics Forum | Thu Nov 05 09:50:14 EST 2009 | adlsmt
Before you buy a manual screen printer try to do it by hand. We hand stenciled boards with 19mil pitch parts for three years with decent results, with your parts it should be simple. lay the board on a piece of ESD bubblewrap, the kind with small bub
Buyer, Seller, Broker of Electronic Assembly Equipment
Equipment Dealer / Broker / Auctions
309 West Pickle Alley
Rushford, MN USA
Phone: 507-864-7477