Electronics Forum | Tue Mar 21 19:34:32 EST 2006 | Tom Smykowski
Omar: I dealt with this so called "hot bar" process also, and you're right; it's neither reliable nor repeatable. The goal was to attach a flex LCD display to another flex circuit. The flex LCD was constructed of resin and conductive silver particl
Electronics Forum | Wed Mar 29 11:42:20 EST 2006 | Frank
Since you are a HM/LV facility take a look at the feeder design. I noticed that the MyData feeders (that I have seen) peel back a lot of pockets before the pick, so when you change part numbers on the feeder there is a larger waste of components. O
Electronics Forum | Wed Mar 29 18:20:07 EST 2006 | LD
We are also a high mix/low volume OEM and are running Samsung CP45's with quick change carts on both sides of the machine. We currently average 12 minutes of internal changeover time per run with an average of 17 changeovers/day for 2 shifts. We ty
Electronics Forum | Tue Apr 11 08:29:31 EDT 2006 | mapell
Hi Dougs I worked a bit a few years ago with a diode type soldering laser. I found laser soldering very application specific so make sure you send samples off to differnt companies to see actual results. You can get good results with a laser system
Electronics Forum | Tue Apr 11 15:37:31 EDT 2006 | stockley
(Hey Cal how you doing?) I can't resist this. You can sort of do what you're hoping for but you have to be very careful. Let the component run out and let the machine get as far as it's going to go. Then go to "Software Options", "Test commands" then
Electronics Forum | Sat Apr 15 19:11:53 EDT 2006 | daxman
If I've been clear, the parts become offset as the XY table moves around, without fiducial correction. It's when it does a fiducial correction that the placement is alright. If the placement is excellent, and I just zip the table around...load posit
Electronics Forum | Mon May 22 15:46:49 EDT 2006 | adlsmt
Grant has a good idea, we started that way also. We made a tank out of stainless steel with copper tube coils about 18" off the bottom. Circulate cold water through the tubes to condense the vapor to keep the loss down. We used electric burners under
Electronics Forum | Wed Apr 26 07:37:34 EDT 2006 | amol_kane
"Can we reuse the same machine? My point here is that the non lead free process has already coated the machine interior ( exhaust, internal flow ) with leaded component, and by conversion to lead free are we containminating the lead free product from
Electronics Forum | Wed Apr 26 07:37:52 EDT 2006 | amol_kane
"Can we reuse the same machine? My point here is that the non lead free process has already coated the machine interior ( exhaust, internal flow ) with leaded component, and by conversion to lead free are we containminating the lead free product from
Electronics Forum | Wed May 10 09:15:12 EDT 2006 | DJuelich
We currently have 5 MyData machines in our facility. Our production lines are the Mydata Synergy package which is two My9 machines connected together and both machines have the Hydra heads in them which is giving us 15k cph and these are rated at 27
.jpg)
Buyer, Seller, Broker of Electronic Assembly Equipment
Equipment Dealer / Broker / Auctions
309 West Pickle Alley
Rushford, MN USA
Phone: 507-864-7477
