Electronics Forum | Tue Jul 03 10:20:15 EDT 2018 | yannis
Our firm is SMT factory exclude design, components are selected by customers. We are going on a project by studying the solderability life of warranty at least 3 year for customers requirement. The theory is if the workmanship is good enough, then th
Electronics Forum | Fri Sep 07 11:46:29 EDT 2018 | dleeper
Air gap on the PCB is determined the pad spacing which in turn is governed by the component. As long as the PCB designer is following the typical BGA layout best practices; i.e no open via in pad, non-solder mask defined pads, solder mask covered tra
Electronics Forum | Thu Oct 18 12:15:03 EDT 2018 | teresat2
The numerous traits of an electronic assembly comprise high volume assembly, BGA, AOI and 3 dimensional solder paste inspection. The value incorporated features of these assembly services comprise low loss, blended technology assembly, many layer, du
Electronics Forum | Tue Dec 11 18:50:47 EST 2018 | vinzon02
HI Rob; The thermal conductive adhesive needs to apply heat to stick on PCB. It's surface has not adhesive tape to fix it before placement of IC. Process: 1.Place the epoxy adhesive tape on PCB. (IC middle part area) 2.Apply heat on epoxy adhesive
Electronics Forum | Fri Feb 01 02:32:31 EST 2019 | robl
It's nice to be able to do things in house, and it's good to have somewhere without commercial pressures to learn and make mistakes, so I can understand where you are trying to go. Those machines look a little lightweight for consistent quality pr
Electronics Forum | Mon Feb 04 17:47:20 EST 2019 | arbpkevin
When I power up the machine and it finishes booting into VIOS, I normally hit the ready button to power up the drives so I can perform the origin search. Instead of "latching on" the contactors pull in, and then quickly release. If you hold down th
Electronics Forum | Mon Apr 01 13:40:38 EDT 2019 | lapskrfc
Hi all, I'm thinking of adding a high-end rework station to my lab. Budget-wise I can basically afford all the solutions from Finetech, Pace, Ersa, and others. However, I'm not sure which one to go with. I'm considering Finetech Core-plus and Pace
Electronics Forum | Mon Apr 29 12:45:00 EDT 2019 | slthomas
When you say "....is there a way to easily (or at all) reference parts with the same specs..." do you mean when ordering stencils, or are you trying to drive your designers to choose a package that you already have in play when they have package opti
Electronics Forum | Mon Jul 08 16:03:06 EDT 2019 | slthomas
My recollection is that there is a carrier clip locator that positions (centers) the clip in front of the CTA. Has the adjustment on that been confirmed as well? (Edited because some of it's coming back to me!): I think there is a diamond shaped pin
Electronics Forum | Fri Jul 26 14:19:14 EDT 2019 | slthomas
Since our process engineer took off for allegedly greener pastures I've taken it upon myself to provide whatever assistance I can with the process side. In this case I'm trying to get the "2 1/2D" inspection up and running. They've never us