Electronics Forum | Fri Aug 10 18:43:18 EDT 2007 | mika
I think I still have the Service manual for 4796 if You are interested. If so You can have it for free. This is the manual that UIC/Sanyo tech engineers use, but maybe it is no good for you since it will req. training on the machine and also know exa
Electronics Forum | Wed Feb 13 19:32:02 EST 2008 | daxman
Greetings everyone. We are currently doing some experimentation with solder paste printing over ground planes. In this application, the entire perimeter of the PCB is a ground plane. It's about 4mm wide and wraps around the whole PCB; There is no so
Electronics Forum | Thu Apr 17 05:14:40 EDT 2008 | gregoryyork
I have seen similar things like this before with Solder Resist redepositig back on the pads, this is a clear residue very hard to see. Solder resist will obviously resist solder adhering to it. If you rework the boards then the heat of the iron will
Electronics Forum | Wed Aug 13 05:18:40 EDT 2008 | lococost
that's a pretty cool idea, I like some thinking 'outside the box '! 1. I don't think picking it up and placing it will be much of a problem. once the rivet is placed it will be held in place by the paste. However, you would need to make a tray that
Electronics Forum | Mon Aug 25 15:40:58 EDT 2008 | dyoungquist
I am seeing poor quality solder joints, mostly on 0402 components. The problem is that while the pad on the pcb is getting fully wetted, the solder is not flowing up the sides of the 0402 component, i.e. the 0402 lead is somewhat de-wetting. The re
Electronics Forum | Sun Nov 23 08:28:16 EST 2008 | orian
Wow im amazed by the amount of replies I got, thank you all for your time. Davef, Mika, and eetour Thank you all for the websites, I've found googling homebrew to be most useful there really is alot of content, too bad I didn't search for that in th
Electronics Forum | Sun Jul 26 06:31:07 EDT 2009 | hohk
Hi everyone, I need to connect a cylindrical disc device (piezo ceramic sensor) to the PCB trace without using high temp solder. I plan to use "3M™ XYZ-Axis Electrically Conductive Adhesive Transfer Tape 9719" to connect the device to the PCB trace
Electronics Forum | Fri Sep 18 11:23:32 EDT 2009 | isd_jwendell
I know nothing about Xbox specific rework, but have a lot of experience with PCB repairs. "...maybe think its a bad idea now not knowing what im doing" Don't get discouraged, it's a learning process. If it was that easy everyone would be doing it.
Electronics Forum | Mon Jan 18 10:49:22 EST 2010 | pcbrookie
Hello all, One of our resistor arrays is becoming detached from its balls after reflow. This is the second instance of this happening. The balls are clearly soldered to the board, but the actual package is coming off (package pads are quite bare).
Electronics Forum | Fri May 07 15:23:24 EDT 2010 | hegemon
We are evaluating Vapor Phase right now, and there is something that bothers me a bit. The machine has a preheating stage where we can bring the board, components and paste up to temp to dry the paste out before descending into the Vapor. The heatin
Golden State is a contract manufacturer that makes wire harnesses, electromechanical assemblies (box builds, subassemblies, PCBAs, kits, etc.) and services (sorting, rework, value additive manufacturing engineering)
18220 Butterfield Blvd
Morgan Hill, USA
Phone: 5102268155
.gif)
