Electronics Forum: pcb and separator (Page 1 of 69)

pcb separator

Electronics Forum | Fri May 11 09:11:05 EDT 2001 | Ian T

hi all i'm looking for a automatic pcb seperator, that uses a knife not a router. i haven't been able to find one one the net. any help whould be appreciated thx ian

pcb separator

Electronics Forum | Fri May 11 11:17:06 EDT 2001 | caldon

www.cencorp.com They have a host of PCB shearing seperating machines. Caldon W. Driscoll ACI USA 610-362-1200 cdriscoll@aciusa.org

pcb separator

Electronics Forum | Tue May 15 12:14:25 EDT 2001 | brownsj

If the boards are pre-scored, I've used a system called the CAB Maestro which I found to be a very cost effect piece of equipment. www.cabtechn.com Steve.

pcb separator

Electronics Forum | Fri May 11 17:21:04 EDT 2001 | davef

Three main groups of depaneling equipment are: 1 Scoring: Limited to straight edges and mainly 90� angles 2 Routing: And a cloud of dust 3 Singulating: Hard tooled by board To get started understanding the suppliers look here: http://www.cassembly.c

how to assemble the blade on the PCB separator

Electronics Forum | Fri Jul 28 02:49:24 EDT 2017 | summertang

PCB Separator assemble manual for you

seperation of soldermask and pcb

Electronics Forum | Tue Mar 18 11:53:58 EDT 2014 | sara_pcb

Our contract manufacturing agency have procured pcbs from approved vendor. After assembly we found solder mask separated from the PCB on the epoxy area as patches. The top side is intact. also over the pcb tracks, the mask got damaged. In what c

how to assemble the blade on the PCB separator

Electronics Forum | Fri Jul 28 08:58:25 EDT 2017 | sumote

Which one? I have used a HEKTOR. The blade, from what I remember, was held in place with a couple of guide rails and 1 socket head cap screw. Simple, easy, and worked like a champ.

pcb purchasing and pcb assembly

Electronics Forum | Thu Mar 19 12:26:10 EDT 2020 | yuaanliie

You have mostly set in your mind before purchasing PCB i.e. PCB is an acronym for the printed circuit board. Last month I purchased PCB from Great PCB.

pcb purchasing and pcb assembly

Electronics Forum | Wed Mar 11 04:05:02 EDT 2020 | floravictor

Due to the impact of the epidemic, will everyone's purchases be affected? We are pcb factory in Shenzhen, we are already back to work. skype: qjthomasxiao

The minimal distance btw component and the edge of pcb

Electronics Forum | Sat Nov 05 20:23:11 EDT 2016 | sarason

Close but not to close, would have to be the spec. Or depends on your separating technology. Prerouted boards on a panel, you could go right up to the edge. V-grove you will need more distance, maybe 2mm's or more. The distance from the panel edge to

  1 2 3 4 5 6 7 8 9 10 Next

pcb and separator searches for Companies, Equipment, Machines, Suppliers & Information

Precision PCB Services, Inc
Precision PCB Services, Inc

Products, Services, Training, and Consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep & Sole Agent in North America for Shuttle Star BGA Rework Stations.

Training Provider / Manufacturer's Representative / Equipment Dealer / Broker / Auctions / Consultant / Service Provider

1750 Mitchell Ave.
Oroville, CA USA

Phone: (888) 406-2830