Electronics Forum: pcb warping (Page 1 of 19)

metal core/clad pcb

Electronics Forum | Wed Aug 11 18:35:17 EDT 2010 | julie1

Anyone work with or have knowledge about metal core/clad boards? The board I'm working with is approximately 2" X 3/4" aluminum core pcb, in a 56 up array. There are 3 LED placements per board. I'm having trouble getting a consistent screen print.

pcb board deflection when mounting component

Electronics Forum | Wed Oct 30 01:23:19 EST 2002 | jasper

Normally warp max 1% of diagonal board measurement is acceptable. What's your p&p like? Some will not experience problems at all! reg Jasper

pcb board deflection when mounting component

Electronics Forum | Wed Oct 30 01:23:22 EST 2002 | jasper

It has been my experience that when all > conditions are as they are supposed to be there > should be zero or very little deflection. When > you start placing components with pick and place > equipment that does not have a Z pressure sense, > yo

672 PBGA on PC Card .015 thick pcb

Electronics Forum | Thu Oct 11 22:25:50 EDT 2001 | davef

Bruce I�m with yall. Designers and fabricators say �pins�. You say: * BGA pins are 1mm [0.039�] pitch. * BGA pads are 0.4mm [0.0157�] diameter. * BGA pins are 0.6 mm [0.024�] side-to-side. * Board thickness is ~0.4 mm [0.015�] First, as you can

PCB Warp Issues

Electronics Forum | Fri Jul 16 08:14:15 EDT 2010 | vetteboy86

We're expereincing issues in our pick and place machine due to what I consider a server warping of the PCB. The PCB is received this way from our PCB manufacturer. Before I push to much, I would like to know options for a cause. The warp is so bad,

DoE on post-reflow PCB - warp

Electronics Forum | Tue Jun 25 01:01:15 EDT 2002 | ianchan

Hi mates, has anyone ever done a DoE on the degree of warp PCB, after a SMT Reflow process? what were the findings and conclusion based on such a DoE? which were the critical (DoE) factors that influence the degree of warp PCB? any optimal reflow se

DoE on post-reflow PCB - warp

Electronics Forum | Mon Jul 01 02:42:32 EDT 2002 | ianchan

Daan: thanks for the tip.

DoE on post-reflow PCB - warp

Electronics Forum | Mon Jul 01 13:08:21 EDT 2002 | peterson

What is Tg?

DoE on post-reflow PCB - warp

Electronics Forum | Mon Jul 01 18:30:58 EDT 2002 | mcox

Remember! Empirical data will allow you to take advantage of the inherent continuity of quantitative variables.

PCB Warp Issues

Electronics Forum | Wed Jul 21 12:19:01 EDT 2010 | mb_mfg

To eliminate warping during processing, we have provided customers with composite fixtures to support the board on all 4 edges, with retractable pull down claps that can be added to the top of the PCB after the screen printing. Simply by pushing the

  1 2 3 4 5 6 7 8 9 10 Next

pcb warping searches for Companies, Equipment, Machines, Suppliers & Information

Precision PCB Services, Inc
Precision PCB Services, Inc

Products, services, training, and consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep & Sole Agent in North America for Shuttle Star BGA Rework Stations.

Training Provider / Manufacturer's Representative / Equipment Dealer / Broker / Auctions / Consultant / Service Provider

1750 Mitchell Ave.
Oroville, CA USA

Phone: (888) 406-2830

SMT feeders

Component Placement 101 Training Course
Blackfox IPC Training & Certification

Wave Soldering 101 Training Course