Electronics Forum: pd955py (Page 1 of 1)

Chipbonder in different colors

Electronics Forum | Mon Nov 09 11:40:30 EST 2009 | pbarton

Heraeus make one that is yellow - type PD955PY. This is a printable type.

SMT Adhesive

Electronics Forum | Thu Sep 28 10:49:47 EDT 2006 | pavel_murtishev

Good afternoon, We use PD955M daily and are also happy with PD955M. Consider PD955�s printable version: PD955 PY or PD955 PR (difference is only in color: red or yellow). Do not use IPA for cleaning. IPA tends to harden adhesive making cleaning extr

Re: cleaning glue off of stencils

Electronics Forum | Mon Mar 06 16:42:25 EST 2000 | Jon Wentz

Hi PR, FYI,some adhesives harden within the stencil apertures with IPA if not cleaned well. We used Heraeus PD955PY and had to closely inspect our cleaning process of the stencil. Just another tip, ask your adhesive vendor for their recommendation o

Re: cleaning glue off of stencils

Electronics Forum | Mon Mar 06 16:42:25 EST 2000 | Jon Wentz

Hi PR, FYI,some adhesives harden within the stencil apertures with IPA if not cleaned well. We used Heraeus PD955PY and had to closely inspect our cleaning process of the stencil. Just another tip, ask your adhesive vendor for their recommendation o

Metal foil is pulling away from the screen.

Electronics Forum | Wed Feb 21 09:44:02 EST 2001 | markkrmp

Bill, Are you recommending the heat range of 95-100F (35-38C)to clean stencils with the Smart Sonic using the 440-RT SMT Detergent? The reason I am asking is were are looking at potentially the Model 2003 to clean our paste stencils and our adhesive

Adhesive Application by Stencil

Electronics Forum | Tue Mar 27 15:53:13 EST 2001 | johnw

RW, I've been printing glue by stencil for a while. Like the other guy's say there are various method's and material's that you can use but then your printing paste so the ideal is for as little change as possible to the method's your already using.

Adhesive Application by Stencil

Electronics Forum | Tue Mar 27 15:53:14 EST 2001 | johnw

RW, I've been printing glue by stencil for a while. Like the other guy's say there are various method's and material's that you can use but then your printing paste so the ideal is for as little change as possible to the method's your already using.

Metal foil is pulling away from the screen.

Electronics Forum | Wed Feb 21 14:40:44 EST 2001 | billschreiber

Hello Mark, As with any cleaning process, there are a number of variables that will affect the cleaning of adhesives with a Smart Sonic Stencil Cleaner: brand of adhesive, concentration of cleaning chemistry, temperature of wash solution, etc. Both

Re: SMT Adhesive

Electronics Forum | Thu Oct 15 21:19:21 EDT 1998 | Scott McKee

We have a need to bond Flatpack and Quadpack components to the circuit board. The adhesive should be quick curing, repairable and have a low modulus. It does not have to be thermally conductive (but it would be a plus). The components are current

Adhesive Application by Stencil

Electronics Forum | Fri Mar 23 14:13:20 EST 2001 | mnaddra

RW, I have Screened Adhesive on to several different assemblies and have found that when it is possible I get a much better result than with a dot deposition process (The green strength was greatly improved), the biggest issue I ran in to was the pr

  1  

pd955py searches for Companies, Equipment, Machines, Suppliers & Information

Solder Mask & Low Stand-off Component Cleaning

MSD Dry Cabinets
Used SMT Equipment Auction Spartronics

Easily dispense fine pitch components with ±25µm positioning accuracy.
Online IPC Training & Certification

Software programs for SMT placement and AOI Inspection machines from CAD or Gerber.


PCB Assembly Supplies - ONLINE STORE
Used SMT Equipment Auction Spartronics

Have you found a solution to REDUCE DISPENSE REWORK? Your answer is here.
smt assembly equipment manufacturer

SMT Machines, Parts & Accessories - Used and New