Electronics Forum: pec camera cal (Page 1 of 3)

GSM camera calibration.

Electronics Forum | Thu Sep 08 18:01:22 EDT 2011 | comatose

We had a camera die on one of our GSMs. I got a new camera, and it is working, but I need to either find a cal kit to rent for a day, or else if someone knows a reasonably accurate procedure to calibrate the new camera using the other upward looking

Pick and Place Camera sees Red

Electronics Forum | Thu Sep 08 09:41:51 EDT 2005 | PWH

If you do find your camera is bad, I think they are relatively easy to replace if you get a new one. I have done a 1.0 and 4.0 GSM camera replacements but not a PEC as of yet. If it's like the 1.0 and 2.6 and 4.0's, likely it is not tough but will

SMT component mis-aligned

Electronics Forum | Thu Feb 24 23:01:30 EST 2005 | smtuser1234

One other thing to check is your PEC camera. Universal uses a jig to calibrate this camera but you could check it using this method. 1.Run about ten 0402 parts on tape with the PEC camera off and check placement. If the placement is off change the x\

Pick and Place Camera sees Red

Electronics Forum | Wed Sep 07 15:21:15 EDT 2005 | PWH

You are having problems with the PEC (fid. recognition, etc.) camera, correct? Not that camera(s) on the base machine (2.6 mil, 4.0 mil, etc.). If it is the PEC camera you are talking about I don't know much but if it's one of the other cameras I m

GSM-1 CEP Camera

Electronics Forum | Thu Sep 02 11:44:37 EDT 2010 | swag

No, red light should be what you see from a PEC.

Pick and Place Camera sees Red

Electronics Forum | Thu Sep 08 03:45:22 EDT 2005 | geb

Yes, unfortunately it is the PEC camera which checks Fids and is used for Feeder Teach. I have found that you do need a service check before you can register with UIC. Do you have access to their database still? Thank you

GSM1 feeder teach

Electronics Forum | Mon Aug 20 07:31:26 EDT 2007 | dilogic

We have GSM1 running on USOS V1.4.14. Is there a way to change default light levels for PEC (down looking camera) during feeder teach? Whatever I tried, it is always set to some default level... - Dejan

Pick and Place Camera sees Red

Electronics Forum | Fri Sep 09 06:08:39 EDT 2005 | geb

I think it may be the card thats causing the problem. When both machines are set to display a live image, the faulty machine shows pink/red. When their cables are pulled out of the card the working machine shows grey/noise and the faulty machine stay

GSM1 not performing fiducial PEC?

Electronics Forum | Mon Mar 07 18:23:30 EST 2016 | ttheis

Hi everyone, I'm about 90% to running production on my gsm but I'm not able to get the machine to look at fiducial marks and make corrections to the placement. When I run advanced board configuration and seek to the first fiducial the pec camera tra

GSM-1 CEP Camera

Electronics Forum | Wed Sep 01 14:59:12 EDT 2010 | eezday

I've been working to bring a Universal GSM-1 back to operational readiness at a university. I have lots of pnp experience but little on the GSM. The software is at 3.2.3. When I try to manually "zero the board" in the PWC menu I get only a black s

  1 2 3 Next

pec camera cal searches for Companies, Equipment, Machines, Suppliers & Information

Non-heated dispensing system

Outstanding liquid dispensing and UV curing, all within one platform, watch the video.
MSD Dry Cabinets

Software programs for SMT placement and AOI Inspection machines from CAD or Gerber.
pcb assembly supplies

Inspection mirrors for electronic rework and repair.
Dual Lane Reflow Oven

ONLINE IPC Training & Certification
SMT spare parts

MIRTEC - the Global Leader in PCB INSPECTION Technology.