Electronics Forum: peel test (Page 1 of 8)

peel back force testing

Electronics Forum | Thu Mar 09 17:48:17 EST 2006 | Chris

V-tek makes the PT-45 tester. http://www.vtekusa.com

peel back force testing

Electronics Forum | Thu Mar 09 12:31:46 EST 2006 | jsloot

I am experiencing peel back problems when a particular component is used on a Meridian 1010 and 1020P machine. I would like to start testing this force but I need some more info. Besides GPD who else makes a tester? What industry standards can I refe

delamination test

Electronics Forum | Fri Sep 02 13:13:14 EDT 2005 | stepheniii

50% chance his boss has heard of (or maybe even one time seen) delamination and wants to be sure they don't have that problem. His boss probably felt a need to specify a test and that was one he had heard of. Personally I would recomend find a way f

Component Peel Strenght

Electronics Forum | Tue Oct 10 13:32:26 EDT 2006 | rsteele

Does anyone know of any tests or testing done on the peel strength of components to pads. I have alot of info on FAB level peel strength testing, but nothing on components themselves. Is there any process(es) to test and insure new pastes and reflo

Conformal Coating Issues

Electronics Forum | Fri Jun 01 06:40:39 EDT 2012 | umar

Hi Norman... Thansk on yoru input, actually my adhesion test conduct is after pass of IC test. MY IC Test is shown a good result but when go into teh Test adhesion coating then during peel off test my board was failed.

Dye Penetrant Inspection of solder joint

Electronics Forum | Fri Jun 27 22:33:16 EDT 2003 | Ben

HI, I'm doing a dye penetrant and peel test of non-function BGA solder joints to locate the fracture surface. After applying dye, I found the dye ink just accumulate at the solder mask edge and spread everywhere after I peeled off the package. THis i

Yamaha YV100 Feeders

Electronics Forum | Mon Sep 11 10:35:32 EDT 2006 | Gus Widmayer

Hi Dexter, Your problem may not be with the feeder itself but with the quality of the tape you are receiving. OX3 Corporation performs a peel test on every single line item that is processed through its facility. You may want to check with your cu

Battery Nickel strips soldering in HASL PCB finish

Electronics Forum | Mon Nov 26 13:40:40 EST 2018 | robl

Hi Prem, Yes, the flux in the Cobar paste helped with wetting and joint strength, as does reducing voids as there is more solder in the joint, as does cooling rate. Regarding peel test in KG, it depends on the pad size and volume of solder in the j

Peel back force

Electronics Forum | Thu Aug 31 09:07:48 EDT 2006 | AR

Hi Anybody know of a company/institution who can perform component tape peel back force testing, preferably in the Scandinavian region?

tensile strenght tester

Electronics Forum | Tue Jan 29 22:01:51 EST 2008 | davef

These test are largely useless. Check the fine SMTnet Archives for previous rants. Manufacturers of machines to use are: * Peel tests: Instron [Instron Worldwide Headquarters; 825 University Ave, Norwood, MA 02062-2643; 800 877 6674 http://www.inst

  1 2 3 4 5 6 7 8 Next

peel test searches for Companies, Equipment, Machines, Suppliers & Information