Electronics Forum | Sun Jul 05 23:30:01 EDT 2009 | jeffr
A feedback error means that a particular axis did not respond by moving in a normal manner. Check the following:- 1/.. Mechanical binding. (Servo Off, then check axis moves without binding). 2/.. Check encoder plugs of that axis. Note that Philips/Ya
Electronics Forum | Wed Mar 10 18:35:20 EST 1999 | Earl Moon
| I'm in the process of selecting a medium speed pick & place machine. I need to place a wide range of components from 0805 | chips to a 144 pin MQFP (32mm square 25mil lead spacing). | | Anyway, I'm looking at the Quad QSA-30, the Philips Orion |
Electronics Forum | Thu Jul 09 13:19:38 EDT 2009 | emanuel
Just in case somebody will bump in the same situation and looks for a possible solution, the problem was with a small 2 pin connector that feeds one of the W DC motors. The connector looked ok, but one of the pins pulled a little out and was making
Electronics Forum | Wed Mar 10 16:18:52 EST 1999 | Raymond Morford
I'm in the process of selecting a medium speed pick & place machine. I need to place a wide range of components from 0805 chips to a 144 pin MQFP (32mm square 25mil lead spacing). Anyway, I'm looking at the Quad QSA-30, the Philips Orion (now call
Electronics Forum | Sun Mar 24 16:53:44 EST 2002 | mikestringer
We place a similar square pin style of connector on one of our products. The connector is a 22mm high HW series from Samtek. We have a Yamaha YVL88 MK1 and YV88XS set up to handle them (Yes they are rebadged as Philips machines in some markets). No
Electronics Forum | Thu Mar 11 23:56:47 EST 1999 | Andy Norton
| | I'm in the process of selecting a medium speed pick & place machine. I need to place a wide range of components from 0805 | | chips to a 144 pin MQFP (32mm square 25mil lead spacing). | | | | Anyway, I'm looking at the Quad QSA-30, the Philips
Electronics Forum | Tue Mar 16 18:03:05 EST 1999 | Russell Bartley
| I'm in the process of selecting a medium speed pick & place machine. I need to place a wide range of components from 0805 | chips to a 144 pin MQFP (32mm square 25mil lead spacing). | | Anyway, I'm looking at the Quad QSA-30, the Philips Orion |
Electronics Forum | Wed Mar 17 11:31:45 EST 1999 | Quadmaster
| | I'm in the process of selecting a medium speed pick & place machine. I need to place a wide range of components from 0805 | | chips to a 144 pin MQFP (32mm square 25mil lead spacing). | | | | Anyway, I'm looking at the Quad QSA-30, the Philips
Electronics Forum | Sat Mar 28 17:38:14 EDT 2009 | Peter
Hi, I bought a Philips CSM84 machine 2 weeks ago. I have no experience on SMT machine so I try to learn everything from the manual. There is an error message when I program a simple program and try to get it executed. "PCB FIXING ERR. LOCATE PIN NO
Electronics Forum | Tue Feb 21 10:45:45 EST 2012 | acsscott
Thanks for the password. There is a 7 pin connector for the Emergency stop in and out. It has a mate with a jumper wire attached to the Topaz end. If you put the jumpered mating connector on this, the emergency stop errors go away. The other conn
.gif)
