Electronics Forum | Tue Jul 17 10:47:54 EDT 2012 | upguy
As as per your information and photo, we attached two box fans under our booster and attached them to the white XGTS connector. The fans are blowing upward with airflow between the booster board and the back of the machine. We will carefully watch
Electronics Forum | Wed Oct 24 01:11:03 EDT 2018 | filipblad
Here is a video clip of the issue: https://photos.app.goo.gl/zGfXiPYAhfKFYmN96 and in this clip you can see the solenoids opening if you look closely: https://photos.app.goo.gl/j9ozSVkuNBT2Mxq36
Electronics Forum | Wed Oct 24 09:47:32 EDT 2018 | filipblad
Picture of error in the link: https://photos.app.goo.gl/ptHcVwmbUi2Yi54z6 We did have a problem with the force sensor earlier, one of the cables was broken so I soldered it back together and now it works (I get a value of 180 when tool is inserted a
Electronics Forum | Wed Dec 14 10:19:56 EST 2016 | jaktechie
Hello, I am new to this forum but I have a question. We use an Orbotech Discovery Ultra to inspect our photo-tools. We currently use this lint free paper as a contrast material underneath the phototool since the vacuum bed on the AOI is black and ou
Electronics Forum | Thu Aug 23 12:46:30 EDT 2001 | mkallen
In this case, I know my supplier's data is good. They've been supplying this particular PN for a long time now, and the stretch problem appears to be random within a given date code (i.e., most of the boards in each lot are good, but a few exhibit t
Electronics Forum | Thu Aug 23 15:38:58 EDT 2001 | mparker
Bingo - the mylar is the problem. Ask the fab vendor what storage and humidity controls they use on the photo tools. The films can changed geometry from day to day depending on the ambient environment. What controls are used during production? The ra
Electronics Forum | Sat Dec 21 13:03:52 EST 2002 | V.RAMANAND KINI
Hi to all, All of us are familiar with the conventional way of making PCB...I mean...photo tools/expose/develop/etch/plate etc., These involve lots of chemicals and the work place is toxic. I have a small PCB with just two curves (circuit tracks)and
Electronics Forum | Wed Jan 16 21:07:26 EST 2002 | davef
We looked at buying a scanner set-up a few years ago, but could not justify it. So, we use contract scanners, like: Advance Reproductions Corp 100 Flagship Dr.,NAndover, MA 01845 508 685 2911 fax 9564/201 697 1339 Martin Crowley Rep 201 697 1339 Sca
Electronics Forum | Mon Jul 16 16:28:18 EDT 2012 | mikesewell
I'm somewhat frazzled by this one, not being too familiar with the MYs. Head is clean, tried different tools, same tool# from another MY, and have run the Centering Base Level Calibration to no avail. The component heights are correct and the par
Electronics Forum | Sat Dec 12 09:48:16 EST 2015 | ttheis
That would be great; I have a few parts I'm searching for including board support tooling. I can send you some photos and information on my machine. Do you also do training? We're a small business in the Gurnee area off highway 41. Thanks.
