Electronics Forum | Tue Jul 05 07:02:26 EDT 2022 | richardcargill
Possibly, yeah. Or the wrong sized nozzle ( or chipped or blocked ) We have problems occasionally with larger components and vacuum levels. If the component has a makers 'circular void' on the pick up surface then the actual pick coordinates have to
Electronics Forum | Thu Sep 08 18:10:09 EDT 2022 | mt396596
We just went through a similar issue with our MY12E. Make sure your Midas vacuum system is working, check your Midas Z friction. Also verify the Centering unit centering band. You can swap your MOTZ and MOTC to rule out the card. The tool install t
Electronics Forum | Mon Oct 24 07:15:53 EDT 2022 | umar
Hi All SMT Expert and Members, Any one can help or share how to set the attrition formula at SMT machine pick and place process, FYI, I had a product with high mix low volume with qty running per model is less than 50 pcs, the pcb and place machi
Electronics Forum | Thu Jan 05 08:53:21 EST 2023 | tommy_magyar
Check manufacturing date code (if you can) on the reels against your receipt of the material. If you are a contract manufacturer you could make a supplier quality claim if they have sent you expired components (and you did not know). A relatively eas
Electronics Forum | Sun May 07 16:55:27 EDT 2023 | rw
There are times where even if you have the tools on the hydra, they are assigned to the package, and the hydra is active, the machines algorithms will determine if the single mount is faster or easier depending on density of the design. Parameters
Electronics Forum | Wed Sep 13 12:50:44 EDT 2023 | kirill
Greetings, I would like to do a height calibration, because the laser of the machine seems to be out of control, I'll explain why: When I measure the height of a 0402 resistor, I get around -0.60 to -0.70, when I fix it on what the machines has measu
Electronics Forum | Thu Apr 04 09:16:10 EDT 2024 | ianphil
Hi all, looking for some advice. We are in the market for some new pick and place machines and have had a quote for an AM100 from Panasonic. We are looking for flexibility and the ability to handle 0201 inch, all of which this machine seems to be abl
Electronics Forum | Mon Mar 13 08:59:21 EST 2000 | Jeff
Jeff, We do not use push up pin. The nozzle pick-up and placement heights are checked many times. We are looking for wich component can break the nozzles. Thanks for your help, Jeff.
Electronics Forum | Tue Feb 29 23:21:02 EST 2000 | Doug Clement
Can anyone recommend a system for conformal coating a board? We are a interested in an inline system behind our Pick-and-Place machines. Thanks Doug
Electronics Forum | Thu Dec 14 20:49:33 EST 2000 | Ian T
does anyone know if a 0402 can be placed by a FUJI CP3, i can pick them but the vision doesn't read it. any help would be appreciated. Ian T