Electronics Forum | Tue Aug 28 16:05:21 EDT 2001 | stefan
I did not question the accuracy, which is very good, but only 99.8 % of the time. If I require this accuracy for a certain part to be placed, than I want to have this part on target more often than 3 sigma permits.
Electronics Forum | Thu Sep 23 10:28:33 EDT 2004 | JB
We are placing labels using a Hoover-Davis feeder with a GSM. Anybody else out there doing this? My question is: Are you using a special nozzle for this operation?
Electronics Forum | Thu Sep 23 11:50:54 EDT 2004 | JB
We are using a standard nozzle Once placed, the label is not flat, the ends of the label are slightly lifted on both ends. The label is .650 x .200 Have you guys run into a similar problem?
Electronics Forum | Thu Jun 26 09:56:37 EDT 2008 | gabriella
hello Zonker cheaper versions tws essemtec ivastech heeb fridge autotronik more expensive: mydata siemens juki uic GSM europlacer ipulse assemblion I will definitely miss some, but at least is some place to start.
Electronics Forum | Thu Aug 30 15:31:17 EDT 2001 | Eric123
I recommend the Mydata if you want to reduce your stress. I am using Siemens at a new company today. It reminds me of my Quad days, once you get it running it works well but the getting there drives you nuts. Siemens is not up there in the user frein
Electronics Forum | Tue Sep 28 12:44:30 EDT 2004 | JB
You are right, basically our options are down to a custom nozzle. Pushing down the label is not the route that I would go with. Thanks for your input and good to hear that you guys found a way around it.
Electronics Forum | Thu Mar 27 08:23:37 EDT 2014 | emeto
Hello, we have several generation of Siemens machines and one of our lines is ASM SX1 series. Machine is very accurate and reliable as a hardware, but in my opinion the software is their biggest advantage. Software is very powerful and can do things
Electronics Forum | Wed Jun 11 11:50:50 EDT 2008 | mmjm_1099
Mydata is a large footprint. I would personally look into AIM, XP242, or even universals or panasonics. I would make sure to watch auctions or check used market. We just purchased a XP242 not long ago from auction for about half the proce of a new on
Electronics Forum | Mon Mar 31 14:52:02 EDT 2014 | jax
Both Manufacturers and Machine Types are a good choice... Why just these two Manufacturers? Depending on your needs (Changeover times, Board Size, Part Size, Part Counts, Odd Form requirements, CPH requirements, and the list goes on), there might be
Electronics Forum | Tue Aug 28 14:21:39 EDT 2001 | Scott B
You have to be careful here. The figure is expressed as placement accuracy, not process quality therefore 3 sigma does not relate to 2700 PPM defects but 2700 parts per million placed outwith 15microns (0.0006" / 0.6thou). Extrapolating the distribu
A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery.
Equipment Dealer / Broker / Auctions
104 East Street
Middleton, MA USA
Phone: 978 790-2774