Electronics Forum | Wed Apr 29 11:33:36 EDT 1998 | Steve Gregory
| We would like to add another pick and place machine to | the SMT line. We're low volume so we change the line over | after each group of boards. So far we've pretty much | ruled out Siplace in favor of the Universal machines. | Does anyone care to
Electronics Forum | Fri Dec 21 10:54:17 EST 2007 | isd_jwendell
All or nothing You do not need to purchase everything all at once. You can start with the manual stencil printer and oven, which are the lower cost items and easiest to maintain. Placing parts by hand will be very time consuming, but you can do a fe
Electronics Forum | Tue May 24 13:18:43 EDT 2011 | leemeyer
We had a Quad 4C that was fitted with a dispensing nozzle. It was perfect for jobs like this. Place the 1st component in the paste, add a dot or 2 of paste to the top of that part and then place the 2nd component on top. I beleive that you may be ta
Electronics Forum | Sat Mar 09 02:25:35 EST 2013 | ngineer
I'm setting up a rather complicated job on our quad IVc. I was almost done (after days), and after i did the sequence, i saved it, downloaded it, and started checking the picks and places, well, i needed to change one, and went back to the sequence,
Electronics Forum | Fri Jan 28 16:08:18 EST 2005 | russ
Maybe this number is only for the ones that actually got placed!? Like, we had a 15% pick error rate but the ones that did make it were great! So the 1.33 CPK was in regards to what parameter/specifications? accuracy, pick error, or what?
Electronics Forum | Wed Jun 17 10:02:38 EDT 2015 | rgduval
Having some issues with our GSM picking parts that are delivered by the PTF off center; and wondering if there's a relatively painless way to calibrate where the head goes to pick the part on the belt. Near as I can see, the PTF is picking the parts
Electronics Forum | Mon Oct 28 07:07:39 EST 2002 | cyber_wolf
It has been my experience that when all conditions are as they are supposed to be there should be zero or very little deflection. When you start placing components with pick and place equipment that does not have a Z pressure sense, you run the possi
Electronics Forum | Mon Oct 15 23:30:35 EDT 2001 | Ivan Rojas
Well Dave ,,, ,, first thing I should do ,, is check my CAD data , and make sure match with the program in the pick and place machine ,, right now I work with Siemens and GC-Place ,,, In my case it may be other things to look for ,,, if is everythin
Electronics Forum | Thu Aug 16 12:46:47 EDT 2012 | derekj
Thank you for your reply Bob. 1. It appears the machine is picking the part up, hovering over the board and rejecting it. So it's not blowing the parts out of the pocket. Turning the vv off still results in the same issue. 2. All the tolerances are
Electronics Forum | Fri Sep 04 09:33:40 EDT 1998 | Stefan W.
| I need advice for locating 23 Gull wing LED's (all in a straight line) in the x,y, and z axis for a SMT PCB. It is a Hewlett Packard LED (P/N HMLA-QH00-01). The application uses a CCD to detect the position of a ball which floats in a resevior fo
Modular pick and place automation - tape and reel - tube feeder - coplanarity check - assembly machine - contactless pick and place
Av.des Pâquiers 1
St.Blaise, Switzerland
Phone: +41792099060