Electronics Forum: pick and place leds (Page 1 of 83)

CSM-84 pick and place machine.

Electronics Forum | Tue Feb 15 00:27:39 EST 2011 | jeffr

First clean and de-bur the hole in the nozzle, then try it again. If the Head does not pick up at the feeder, then moves to the dump position...it means that the Vacuum Sensor Board has detected that the nozzle vacuum is above the LOW threshold setti

Yamaha pick and place

Electronics Forum | Mon Apr 09 13:16:57 EDT 2018 | harlymh

Would you recommend a Yamaha Pick and place? In terms of reliability, accuracy, cph? We're looking for a pick and place that can deliver a 50 micron accuracy. What brands do you recommend for high accuracy placements?

pick and place vaccum

Electronics Forum | Thu Nov 06 11:12:57 EST 2008 | janz

Hello, One of our pick and place machine uses rietschel vaccum pump. It is making lot of noise. I am in searching alternative solution which could be venturi pumps. Does anyone has experince in changing vaccum pump to venturi system.? What should

pick and place vaccum

Electronics Forum | Mon Nov 10 14:26:16 EST 2008 | slthomas

It'll just transfer the load to your compressor, and who knows how efficient your venturi pump (which can also be noisy) will be (IOW, how much load it puts on your compressor is anyone's guess)? I'd just replace or rebuild the vacuum pump, person

Mydata pick and place

Electronics Forum | Mon Jan 31 12:15:32 EST 2000 | Neil

I am looking for a Mydata users group, one possibly located in the Chicago area. If such a group does not exist, I would be more than happy to help start one. I have an older Mydata TP9 (non-UNIX) machine, with weak (yet expensive) support from the m

Yamaha pick and place

Electronics Forum | Tue Apr 10 02:57:53 EDT 2018 | rob

Yes I would, most of our old Yamaha machines (before 2005) will do 30-35 microns @ 3 sigma with the fine camera option. Our Jukis with His res camera's will hit it too. You should be OK with most things after 1997 with the right camera choice (whic

pick and place vaccum

Electronics Forum | Mon Nov 10 13:27:07 EST 2008 | evtimov

Hi janz, you should be aware of everything. You are going to change subsystem on your machine. How much vacuum you need on the machine? Can you control the vacuum level with your system? Can you control the the system at all? Is it really much more

Expected pick and place precision for 0603 LEDs?

Electronics Forum | Wed Nov 13 15:05:48 EST 2013 | jimmyboz

With what machine? I cannot help until that is disclosed.

Expected pick and place precision for 0603 LEDs?

Electronics Forum | Wed Nov 13 15:33:08 EST 2013 | mondalaci

Good question :) I'd say with a machine that is available for an average pick and place operator nowadays. Our manufacturer is not fixed yet, that's why I don't have any specific. On a related note I'm wondering whether the machine is so importan

Expected pick and place precision for 0603 LEDs?

Electronics Forum | Tue Nov 12 17:11:32 EST 2013 | mondalaci

Hi Folks, I'm working on a LED display that is composed of multiple layers. What is interesting for the point of this discussion is the PCB layer and the light deflector layer on top of it. Please take a look at the related pictures at http://plus

  1 2 3 4 5 6 7 8 9 10 Next

pick and place leds searches for Companies, Equipment, Machines, Suppliers & Information

1st Place Machinery Inc.
1st Place Machinery Inc.

A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery.

Equipment Dealer / Broker

104 East Street
Middleton, MA USA

Phone: 978 790-2774

Used PCB Assembly Equipment & SMT Equipment

Easily dispense fine pitch components with ±25µm positioning accuracy.
Sell Used SMT & Test Equipment

Best Reflow Oven
Conformal Coating Machine under 40000

World's Best Reflow Oven Customizable for Unique Applications
Dispenser Pumps

MSD Dry Cabinets
PCB Cleaning

500+ original new CF081CR CN081CR FEEDER in stock