Electronics Forum: picks (Page 1 of 367)

Pick Up Error

Electronics Forum | Sun Aug 01 11:34:06 EDT 2004 | Dhanish

Can Pick Up Misalignment or Bent Nozzle at Pick and Place Machine can cause missing or misalignment component?

Philips Topaz not picking up nozzle

Electronics Forum | Tue Jun 09 04:49:12 EDT 2015 | vinitverma

Is the machine not picking up nozzle from the nozzle changer or is the head 7 not picking up any components? Or is the mis-pick rate too high?

Juki gang picking same part number

Electronics Forum | Mon Jan 22 05:01:42 EST 2018 | smtspareparts

when encountered the material that should be picked simultaneously but actually not,just stop the machine when the mounter head moves to that feeder and move the pick up coodinator with HOD,till it is picked simultaneously, James http://www.smt-pre

Juki gang picking same part number

Electronics Forum | Mon Mar 26 18:25:09 EDT 2018 | tey422

As far as I know, the gang picking or not, it has to do with the pick positions. By what I mean is the X positions and Y positions have to as close to parallel for all those feeders in order for "gang pick" to work. If one of the feeder XY position

JUKI KE2060R and KE2060L

Electronics Forum | Mon Sep 21 04:23:16 EDT 2009 | smtbox

R series Features FCS (Flex Calibration System) highly regarded easy maintenance just got even easier! The optional FCS calibration jig is a simple to use system to re-calibrate placement accuracy. The machine automatically picks and places jig comp

Missing components in Reel

Electronics Forum | Fri Mar 11 11:40:23 EST 2005 | JB

If there is an empty pocket at the pick up position, because a component "fell off" then the pick and place machine will attempt to pick up more components from the same feeder an "x" amount of times, depending on your component parameters, then it w

Fuji CP642 Auto Pick adjust

Electronics Forum | Fri Jun 22 11:02:13 EDT 2007 | gregf912

I have a CP642E machine that will not function if auto adjust is enabled in Part Descriptor. Symptom: Auto pick offset causes machine to pick part off center to the point of going to end of part after several picks. This only happens to parts that ha

problems picking up PANASONIC ERJ-12ZYJ203U resister.

Electronics Forum | Fri Feb 03 10:34:09 EST 2017 | prdmm1

PANASONIC ERJ-12ZYJ203U i am having a lot of problems picking this resistor up. i have purchased a new tool per engineering (NOT the problem). it seems the my9 is picking up then dropping it. then the machine goes to pick another and picks the dropp

performance improvement

Electronics Forum | Sat Jun 15 07:52:29 EDT 2002 | davef

When picking fruit, the further you climb a tree, the more expensive it gets to pick that fruit.

Tescon Point 501 Pick & Place

Electronics Forum | Tue Apr 04 23:21:28 EDT 2006 | ethercom

Does anybody know of a service engineer for Tescon Point 501 pick & place?

  1 2 3 4 5 6 7 8 9 10 Next

picks searches for Companies, Equipment, Machines, Suppliers & Information