Electronics Forum | Mon Jan 07 12:24:09 EST 2002 | Charlie
What in process methods are being used to validate the value of 0402 resistors during first piece inspection?
Electronics Forum | Mon Jan 07 20:34:20 EST 2002 | davef
Use the same method us use for SMT capacitors with no marking.
Electronics Forum | Tue Jan 08 06:36:35 EST 2002 | stefano_bolleri
Which method do YOU use ????
Electronics Forum | Thu Dec 16 11:25:55 EST 2010 | ssager
Thanks guys, It sounds like adding redundancy and audits to the process is the best low cost option.
Electronics Forum | Wed May 25 08:14:36 EDT 2011 | cluso
Have any of you tried Automated First Article Inspection Systems such as the Cluso Vision Systems FAI?
Electronics Forum | Wed Jul 02 14:25:14 EDT 2003 | Earl Wildes
Greetings. Does anyone know of a good reference on the proper physical handling of surface mount devices? We have a number of very small builds, so our stockroom is very often issuing single piece quantities. The parts are protected from ESD, but
Electronics Forum | Wed Dec 15 13:03:43 EST 2010 | ssager
We have been struggling with first article inspections and have built entire lots incorrectly many times. This seems to affect us on both SMT and Through hole assemblies. We have an AOI, but it is not in-line. Does anyone have any advice for putting
Electronics Forum | Tue Jan 08 07:46:12 EST 2002 | ianchan
Dun you have a LCR meter? or mebbe your side calls it a LCZ meter??? whatever...it measures Inductance, Ohms, Capacitance...check-it-out-manz...
Electronics Forum | Tue Jan 08 17:25:17 EST 2002 | davef
Stephano: Since you have not thought through this, it indicates that your discrepancy reporting and resolution process probably requires critical review. Consider highlighting this issue to your quality assurance staff.
Electronics Forum | Thu Jan 10 04:06:02 EST 2002 | wbu
Hi Ianchan, you mean you set up a line and wait 6h or 2h to go on with production ? Can�t believe that! Wolfgang