Electronics Forum | Sun Nov 07 21:00:15 EST 2010 | mainenetservices
sounds like its probably a timming belt. stock drive products is the place i go for robotics mechanical stuff, They likely have a sutable belt if you can get a good mesurement on everything(mesure the pully teeth, the belt may be streched). https://
Electronics Forum | Fri Nov 19 10:23:07 EST 2010 | adetuc
Hi, Does anyone know what the placement success percentage is for lead components And the placement success percentage for lead free BGA components. We place many varieties of BGA devices, over 100 different size parts, from 1000 pin BGA to small 4mm
Electronics Forum | Wed Dec 08 19:16:20 EST 2010 | jgalarza
Can anyone tell me if there is a formula for finding the after reflow height of solder with no part attached? I have to print some pads that do not have any parts but there can not be more than 1.5mil of solder on the pad after reflow. I am going to
Electronics Forum | Tue Jan 18 18:12:27 EST 2011 | eadthem
Theres something to be said for having a machine operator or inspection person carry the board from the output to the oven. Id say about 1/2 of our issues are fixed/noticed in this simple step of transferring the board from the PNP to the oven. If
Electronics Forum | Sat Jan 22 00:49:02 EST 2011 | leo83
Hi eadthem, Issues like ? To be honest, i am yet to start with SMT Assembly production. I am understanding the procedure, searching right equipment and hence probably i couldnt understand your practical point, would appreciate, if you could please
Electronics Forum | Sat Feb 12 18:35:56 EST 2011 | gabriel1blue
Thank you, that works perfect!! Now I was able to set up the offset's and program the machine, but now head #1 will move to the feeder location but it will not move down to pick up the part, then it moves to the drop area, but its only happening on h
Electronics Forum | Sun Feb 13 16:28:00 EST 2011 | tpappano
Does nozzle #1 lower at all when it should pick up a part or is it just staying in the fully up position? If it does come down, but not quite far enough to contact the part, there are adjusting nuts on top of the head that set the lower limit for no
Electronics Forum | Mon Feb 14 05:58:06 EST 2011 | vinitverma
Gabe, You now need to teach the Datum position for the front feederbar and for the rear feederbar too. If I'm not mistaken the datum position for the front feederbar is position no. 21. Just put a feeder on position no. 21 and use the camera to find
Electronics Forum | Wed Feb 16 12:56:44 EST 2011 | gabriel1blue
Thank you, I have the program done and ready to run, but Im not able to get the machine to move to the mount location automatically, you say to highlight the location and press shift + P or T but how do I highlight the x,y data 1st? Or is this done o
Electronics Forum | Wed Feb 16 19:55:34 EST 2011 | jeffr
There are three versions of the CSM84, old, older and really old. The older machines can only do fun things around the PCB if you toggle RUNMODE 1 from AUTO to be UTILITY... then you can use the utility program "PIC" to trace around the PCB or do min