Electronics Forum | Thu Oct 29 08:19:57 EDT 2009 | cyber_wolf
Hmmm...The Juki machines are designed for high mix frequent change over. They are very flexible. I am not familiar with a JX100. We have KE2000 series machines. One of my buddies owns a small contract business. He has an older Quad. I believe it i
Electronics Forum | Fri Oct 30 10:21:25 EDT 2009 | gantry228
I know of a machine that has: - 54 8mm slots - Single up JEDEC tray holder - And the availability to present tube parts without taking feeder slots. This product has full vision and can pick and place 0201 components and "fine" pitch to .020". With
Electronics Forum | Fri Nov 06 07:41:22 EST 2009 | meritajs
You started here discussion that interesting for many OEM firms.Recently I was asked to give recommendation for one such firm. What kind of equipment they could buy for producing small series? I have learned many types equipment from different firm
Electronics Forum | Tue Nov 10 23:17:39 EST 2009 | vinitverma
Hi Jax, I didn't understand your question very well. I'll try to answer based on whatever I could understand! Most Gerber viewers available in the market - especially free versions, DONOT have the capability to group apertures to build component. T
Electronics Forum | Mon Nov 02 07:32:44 EST 2009 | umar
Hi..., We have build the PCBA base on IPC 610 and J-std-001 class 3 product, All the ESD pre caution been implement at my production side, ESD flooring, wear the ESD smock, wear the ESD shoe, use the finger coat and those not use the finger coat the
Electronics Forum | Wed Nov 04 07:39:34 EST 2009 | vetteboy86
We have started using an RGB LED and today ran the first boards down our line. I noticed an immediate issue with placing these. I'm using a quad QSP-2. The part sticks to the nozzle. The nozzles are clean. I have adjusted machine handling so that vac
Electronics Forum | Fri Nov 13 08:43:02 EST 2009 | herman
reash, Go directly to APS and get one of the APS GF-12 ovens. I have been using these for 15 years as a low-to-medium volume oven for general purpose reflow of CCAs up to about 12" by 12" with excellent results. I use them for BGA re-balling, underfi
Electronics Forum | Fri Nov 13 11:02:46 EST 2009 | isd_jwendell
I use the LPKF model S. Operator uses a urethane(?) squeegee. Pressure and speed are controlled by the operator, which hasn't been a problem for me. The only problem I had was that I would forget to raise the PCB before I would start to squeegee the
Electronics Forum | Mon Jan 04 15:40:31 EST 2010 | dilogic
We recently got a job where (after placing SMT parts) we have to solder LED dot-matrix 8x8 display modules manually on the pcb. Due to the PCB design, it has to be TH type (also, it's the only type available) and soldered manually (or using selective
Electronics Forum | Thu Apr 01 03:44:31 EDT 2010 | nico67640
Good Morning Nicolas, > > Per J-STD-033B, 5.3.3.2 > states that a Dry cabintet maintained at not > greater than 5% RH may be considered MBB > storage. > > Hope this helps > > Chris Thanks Chris for your answer. I'm ok with you about the per