Electronics Forum | Tue Nov 23 15:59:51 EST 2004 | RCanten
I have seen some crazy placement problems that I just couldn't figure out in the past and several have come down to boards moving in the clamp. I would double check to make sure you are clamping secure enough and slow your table speed down and see if
Electronics Forum | Thu Dec 09 04:21:22 EST 2004 | chad
I have worked w/ the GSI SVS 8200's. They seem to do a pretty decent job, but, they are a "bottleneck" on my lines. I hope you are using good screen printers, because they WILL find the slightest "defect". About 75% of our failures are actually fa
Electronics Forum | Sat Feb 05 15:36:48 EST 2005 | etienne
Hi Brad, I suggest you get in contact with Sony. http://www.sonyfa.com/si_e1000/sie1000_producthome.cfm They got the SI E-1100, capable of placing QFPs64/0.5mm simultaenously with all other heads full of components, not like many other machines. See
Electronics Forum | Wed Jul 06 09:36:22 EDT 2005 | dougs
aj, what do you do if your customers engineers cant be bothered sorting out the CAD data, or if you tell them you need it in a certain format and it just keeps coming in the same way anyway, we can't rely on our customers ( or some of them in partic
Electronics Forum | Thu Feb 03 04:55:21 EST 2005 | Dougs
OK, component wide portion runs with the conveyor, so really both sides should heat and cool at the same rate. The crack is at the termination between end cap and ceramic body and run vertically up the end cap, so when we remove the cap it comes of
Electronics Forum | Fri Feb 11 03:51:04 EST 2005 | Rob
Positive side: Less change overs, increased productivity 1/2 booking in & replenishement functions Negative: If you have more than one SMT line,common part numbers & a MRP system it may tell you you can run 3 jobs at once with 1 reel Some machin
Electronics Forum | Thu Mar 03 12:55:31 EST 2005 | dru_wells
We seek the following. Any referrals would be appreciated. Responsible for the complete development of unique feeders that present custom metal stampings and connector products for pickup by industry standard placement machines. The parts will be i
Electronics Forum | Tue Apr 05 08:16:30 EDT 2005 | jax
This is not a built in function, you have to trick the machine. 1. Determine what you want to use to play "whack-a-mole" Regular or Modified nozzle. Regular will most likely get damaged from multiple "whacks" 2. Teach the nozzle
Electronics Forum | Fri Apr 08 07:55:14 EDT 2005 | CN
Sounds like it would by tough to justify, thought of oursourcing? if the volume is really that low I bet it would be cheaper to find an outside source to build them for you. As far as hand placment accuracy If you are hand placing BGA's or even worse
Electronics Forum | Thu Apr 28 02:03:10 EDT 2005 | Yngwie
Just to check and see if I'm using the right formula in my "cost per component placement" calculation is correct or not. Any input would be much appreciated. Total cost of the machine : A Depreciates over 5 years Actual/best UPH obtained 11000 cph
