Electronics Forum | Tue Nov 05 10:55:41 EST 2019 | engmagana
Hi Ameen, Did you fix it? I had the exact same problem with the same type of coil , check the images , LF solder SAC305, we have adjusted the solder apertures to the minimum solder required to have a strong joint enough to break the pad from the bo
Electronics Forum | Sun Jan 05 10:00:08 EST 2020 | davef
I don't believe that there is a Grid-Lok stencil printer. Grid-Lok is a board support add-on product for placement and printer machines developed by Ovation Products [ Bethlehem, PA, USA, 1-855-GRID-LOK or +1-484-893-1028, info@grid-lok.com ovation-p
Electronics Forum | Sat Jan 11 17:06:27 EST 2020 | silverlead
I have worked with both Gridlock and conventional pin support mostly on DEK machines. Gridlock allows to reduce greatly changeover time in hi mix/low volume environment when switching sides on double sided boards. It also eliminates guesswork when ma
Electronics Forum | Wed May 06 18:15:03 EDT 2020 | travishemen
I thought i posted this last night. The easiest way I can think of to see what nozzle is being used is to put the machine in step mode and do one part at a time. Also the levelness of the table and Z0 could be suspect. On a CP643 this can get out
Electronics Forum | Tue Feb 09 18:53:20 EST 2021 | SMTA-64387083
You'll have to do at least 2up array since most conveyors won't handle boards less than 2in wide. I'm assuming it's FR4 lead free temperature material and PCB's are scored in the panel. The 13-16in lengths aren't a problem other than depaneling. With
Electronics Forum | Sat Feb 13 08:03:14 EST 2021 | dilogic
I might answer some of your questions: 1 - in order to use old 24V feeders, Advantis needs 24V feeder kit installed. As far as I figured out, it's only 24V transformer and wiring, so I guess you can do it yourselves if the machine is not upgraded
Electronics Forum | Tue Oct 25 00:32:32 EDT 2022 | alexvolovich
> How reliable are TM feeders for 0402 placements? > I have a board with 2000+ 0402s that I need to > run daily. I don't need agilis feeders for > change overs as we use less than 50 feeders > total. Standard TM8 magazines will
Electronics Forum | Thu Nov 03 01:39:53 EDT 2022 | spacecase
Thank you for the response, left the machine turned off for a good period of time and somehow the issue solved itself. I was able to calibrate the next day and homing hasn't been an issue. However now I'm having another problem where it gets 4 comple
Electronics Forum | Thu Nov 03 02:16:55 EDT 2022 | spacecase
Hey I'm having an issue with a samsung 421f component placer. The machine is fine on the first 5 boards then on the 6th or so it just throws them wherever. The problem is the smallest flat components start sticking to the nozzle even after hitting th
Electronics Forum | Sat Apr 01 16:41:01 EDT 2023 | dilogic
Today I stumbled upon very odd issue - we have one GSM2 with FlehJet heads on both axes. New program was created and it stops on the first task for Head2 throwing out a message like this: "Component 0u1/0805 (reference id C4) can't be found wit
