Electronics Forum | Thu Aug 07 15:12:41 EDT 2003 | barryg
We are planning on placing a smt connector, the spec sheet calls out that "suction tape is added for smt suction". I am assuming that since this is a straight connector and I will be picking it up across where the pins are (male connector)that there
Electronics Forum | Tue Dec 09 14:27:20 EST 2003 | larryk
Your question is too broad.Tell us what your plans are for this AOI. Examples; pre or post reflow, Component inspection, solder inspection, throughput rate?
Electronics Forum | Thu Apr 01 15:11:03 EST 2004 | Alan
I have also been using Flexa with the Circuitcam interface. Very easy application to use. The documentation package is very nice also if you plan on using it for visual aids.
Electronics Forum | Tue Apr 27 02:30:10 EDT 2004 | imtyaz
we are planning for ISO14001 certification so please advise for this is there any web site help full for electronics manufacturing industry for this
Electronics Forum | Tue Aug 03 14:46:25 EDT 2004 | russ
We recommend to the designers "the smallest diameter that you can get away with", that will help reduce the solder scavenging into via diring reflow. unless you are planning on having them filled as Dave F mentioned. Russ
Electronics Forum | Mon Aug 02 11:11:01 EDT 2004 | tberkey
I am running no clean boards for automotive applications. We have continued to use a cleanliness test as part of our control plan.I am wondering if anyone has been able to eliminate the cleanliness test due to the use of no clean materials?
Electronics Forum | Tue Oct 26 09:17:15 EDT 2004 | Greg D
Hi, I'm planning to get a new oven. I wanna know the advantages and disadvantages of each oven type over each other. I'm being told to go for an 8 zone oven. thanks for your help. regards,
Electronics Forum | Tue Feb 01 15:01:02 EST 2005 | mee13
California has a lead free plan set to go into effect on jan1 2007
Electronics Forum | Fri Apr 01 15:43:26 EST 2005 | davef
Shannon: These detectors are aimed at applications that get bitchin' hot, like 600*C. We doubt there was a plan [by Omega] to have you use some sappy little 220*C solder to attach these leads. Check with your supplier, but we're wondering if you ca
Electronics Forum | Sat Apr 23 20:07:22 EDT 2005 | molosse21
Does someone use Ultrasonic washing machine to remove nc or rma flux residu from the pcb??? I have no experience with this device and I plan to use this for a very small production lot Do you recommand this ??? How are your results ??? What kind