Electronics Forum | Wed Nov 20 11:23:00 EST 2002 | Gris
Does any body know how many US or europe based component manufacturers have decided not to use Sn/Bi on lead plating. Most of far east manufacturers seem to have selected Sn/Bi on their component finish. Intresting articles on Samsung,Epson and OKI w
Electronics Forum | Wed Feb 20 10:28:38 EST 2002 | jax
Silver in paste is usually employed to prevent scavenging of silver from silver plated surfaces, BUT Dave's right. I wouldn't think Components are uniform enough to base a process change on. See how it goes with what you have. You will probably find
Electronics Forum | Fri Feb 22 15:16:24 EST 2002 | rkevin
Bet your using tin/ lead plated components with a lead free Cu/Ag/Sn alloy. It leads to intermetallic cracking. Wow didn't anyone tell you to check the archives yet, It seems to be the answer given to everyone. Why have an interactive site if you alw
Electronics Forum | Fri May 10 13:52:46 EDT 2002 | pjc
FYI: not all OSP are created equal. I have had expierence, both good and bad w/ OSP boards. To qualify the vendor I would take a bare board and run it thru my oven twice on a reflow profile then flux it with NC flux and run it thru the wave solder fo
Electronics Forum | Mon May 06 21:39:46 EDT 2002 | Yannick
Hi, I would like to know if someone is using a immersion AG for their board and if this plating modify the property of the solder paste? do I need to make changes on my temperature profile? We want to change from HASL to Immersion AG to mount
Electronics Forum | Sun May 12 22:01:44 EDT 2002 | ianchan
Hi mates, since I read about this immersion Ag plated PCB, was wondering if its so damm good, why so few people are using it? and why so long to market its PCBA application-virtues? feedback from bouncing this question around is Ag is prone to corr
Electronics Forum | Wed May 22 09:59:52 EDT 2002 | stefwitt
I don't know how much Siemens charges for this option, but I guess we both know what a new head costs. Siemens did let go on more service techs. last weekend. They all can install this option for less than Siemens quoted. If you can't find a tech. in
Electronics Forum | Tue Jun 04 14:25:57 EDT 2002 | swagner
We have had the crash protection installed on all of our machines and they are worth their weight in gold! Siemens installed some of ours on a special they were running last year, I believe it ran about $1,700.00 per machine, remember its a buyers m
Electronics Forum | Thu May 30 11:37:27 EDT 2002 | Ron Costa
Hi Ray, A couple of things to look into: 1.date code of reel 2. what is the termination made up of tin/lead or tin/lead/palladium. Check with part manufacturer. 3.paste volume/aperture openings 4.PCB plating 5.solder paste formulation Good luck R
Electronics Forum | Wed May 29 19:17:17 EDT 2002 | russ
We are starting to see a large increase in the use of through board gold plated connectors that require hand soldering with the limitation of .o6" encroachment up the pin. What is the best way to accomplish this? we currently scrap about 5-10% of t