Electronics Forum | Thu Aug 20 08:23:23 EDT 2009 | ratsalad
One diagnostic tool that I have found useful in the past is the "hot plate test". Place suspect components and/or PCB's on a hot plate and turn it on High. Then observe. Granted the conditions on the hot plate are not the same as in a reflow oven,
Electronics Forum | Tue Feb 02 11:59:20 EST 2010 | stepheniii
How about sanding then plating fresh copper?
Electronics Forum | Thu Apr 15 10:46:08 EDT 2010 | baildl632
Will this work for Tin Immersion plating or does anyone have suggestions on what will work?
Electronics Forum | Fri Mar 18 16:25:07 EDT 2011 | bradbriggs
Thanks I will check it out.
Electronics Forum | Fri Feb 22 13:19:54 EST 2013 | caurbach
Our new Soltec Delta 3 has this feature (they call it mainwave pushup) where you can add up to 60 rpm to the pump after the leading edge passes over the wave. Unfortunately, our old Delta Wave doesn't have this feature. Ideally we'd like to set it
Electronics Forum | Fri Feb 22 14:29:55 EST 2013 | patrickbruneel
Caurbach, Higher preheat and longer dwelltime will fix your problem.
Electronics Forum | Wed Jul 17 15:00:37 EDT 2013 | jmiller
what is the effect of pre-dip tank temp. and dip tank temp. on the thickness of the IAg?
Electronics Forum | Thu Nov 21 11:19:58 EST 2013 | davef
Generally, solder connections and leads are conformal coated, unless there is a reason not to coat them.
Electronics Forum | Mon Jun 15 17:54:38 EDT 2015 | catsem23
Hi I have been having a problem with my Hydra tool reference plate. Machine keeps stopping and comes up with error message - failed to locate hydra tool reference marks & Error mounting component .... from feeder ..... with nozzle .... I have check
Electronics Forum | Mon Feb 15 14:58:36 EST 2016 | charliedci
Remove the aluminum plate/filter. The first board on left side. The run/halt switch should be visible.