Electronics Forum | Tue Nov 01 14:38:45 EDT 2022 | glasscake
Did the tray changer use to work on this machine? was it ever disabled and uncoupled from the machine? If you have an old data disk or backup disk of the machine try restoring to that. There is also a jumper inside the wiring harness to include the
Electronics Forum | Tue Dec 13 19:33:06 EST 2022 | proceng1
Does yours have the removeable hard drive that unlocks with a key and the whole thing comes out? Try plugging the HDD directly in, and don't use the adapter part. It's kind of tricky, but I was told by the service techs that a bunch of those adapt
Electronics Forum | Thu Mar 23 13:36:30 EDT 2023 | tomdegas
Running a Mydata MY 9 and trying to Restart the machine and try to initiate the hardware, get an error message of F-MOT-MSETDYN X/163: Illegal value of DSP command argument. It seems to be related to the x drive. I've check all the connections on
Electronics Forum | Mon Feb 22 03:13:56 EST 2016 | sarason
Try PCBSynergy. It does VIOS, both versions, can read 10 CAD formats does the Philips CAD2CAD interchange format(*.CAD)doesn't work from Gerber files but does interface to Visualplace which does, which in turn interfaces to PCBSynergy. PCBSynergy is
Electronics Forum | Tue Jan 06 08:05:33 EST 2004 | stefwitt
The manual is a bit more specific: Connections and Energy Requirements Specification for the Compressed Air For the compressed air supplied for the automatic placement systems HS-180 (adhesive application station as well as placement station) and SP
Electronics Forum | Fri Nov 03 07:28:27 EST 2006 | davef
Via filling methods are: * Tenting * Plugging * Capping * Flooding Tented Via. A via covered with dry film soldermask; the via is not filled. When tenting from both sides there may be issues with trapped air that expands during mass soldering. Plug
Electronics Forum | Sat Jan 20 17:41:11 EST 2007 | bvdb
Hoping someone can help us. Our Fuji IP-1 won't boot up unless we disconnect the 25 pin RS232 connector that runs to the MCS16/F programming computer. It doesn't matter if the 9 pin connector on the other end of the cable is plugged into the MCS16/
Electronics Forum | Tue Jul 27 16:44:31 EDT 1999 | Earl Moon
| | | Presently protos of micro-bgas (80i/o) pitch .030/.031 | | | 12BGA per assembly | | | | | | The board is a (.062, 4 layers) FR-4 using Dry film | | | Pads .014inch | | | Vias within footprint .020inch | | | Vias to be filled by bottom side(sol
Electronics Forum | Tue Jul 27 17:23:45 EDT 1999 | M.L
| | | | Presently protos of micro-bgas (80i/o) pitch .030/.031 | | | | 12BGA per assembly | | | | | | | | The board is a (.062, 4 layers) FR-4 using Dry film | | | | Pads .014inch | | | | Vias within footprint .020inch | | | | Vias to be filled by b
Electronics Forum | Wed Feb 16 21:51:29 EST 2000 | Dave F
Kurt: Lots of choices, not many of them good, yano. 1 So LPI has taken over the market pretty nearly 100%, but it won't "tent" reliably, because it is not very viscous when applied and drops into the hole. So then, tenting/plugging with LPI is bad