Electronics Forum | Mon Jul 13 17:01:03 EDT 2009 | davef
So, what happens when you: * Run the switches through the reflow oven as piece parts, not assembled on the board? * Pot the switches as piece parts, not assembled on the board?
Electronics Forum | Tue Sep 15 13:02:55 EDT 2009 | horvath83
What do you think about optimal setup for 8-hour working shift and 16-hour standby time. What is the most energy efficient setup for standby time? Complete cooldown or maintaining temperature in solder pot?
Electronics Forum | Fri Jan 08 16:48:21 EST 2010 | allwave
I did the same thing in ours (removed the chip wave). What kind of machine do you have? What I did on our TD machines, I added some extra channels to minize the solder "splash" on the void which is the reason more dross is formed. Hope this helps a
Electronics Forum | Wed Feb 03 11:23:18 EST 2010 | kjs123p
I am just wondering what other people are using as far as gloves when cleaning the dross out of the wave solder pot. We currently are using welding gloves, but the operators say that they are too big and bulky. Does anyone have any suggestions on wh
Electronics Forum | Wed Aug 04 16:30:44 EDT 2010 | dldavis
We are using a Propyl Bromide vapor degreaser solvent. Has anyone heard of this solvent when used near an oven will decompose and cause major corrosion to metals such as in a Reflow oven or a wave solder pot?
Electronics Forum | Thu Nov 18 08:09:49 EST 2010 | vetteboy86
That was our first course of action, and we cannot get solder to adhere to the pins using an iron with solder roll, or by dipping them in a solder pot. We have added flux to the leads as well. At the moment our only success has been with the use of
Electronics Forum | Fri Nov 19 10:26:47 EST 2010 | cyber_wolf
We use copper anti seize on the ball screws in our PBfree reflow ovens.
Electronics Forum | Tue Dec 28 20:49:08 EST 2010 | wingding
We have an ERSA 500 and we need to pull the Pump Housing. The manual is pretty limited and it doesn't offer any information on how to remove it. Do we have to remove all of the solder from the pot first? Or is there some way to pull it without going
Electronics Forum | Fri Jan 14 16:55:31 EST 2011 | tombstonesmt
On our Pilarhouse Jade we use nitrogen to cool the belt that drives our solder pump as well as keep the amount of oxygen to a minimum in our solder pot to reduce dross.
Electronics Forum | Wed Jul 06 15:52:36 EDT 2011 | duso02
Ricky What silicone coating are you using? Are you using at as a coating or as a potting? In other words how thick are you applying it.