Electronics Forum | Fri Feb 01 07:21:32 EST 2019 | dfl
One of my 8mm feeders is blinking the red led after the pick-up. With both buttons the motor works as expected (forward/backward), but after the nozzle pick-up the motor moves forward and then the red led blinks. pressing the buttons the green led l
Electronics Forum | Sat Jul 20 07:40:51 EDT 2019 | kylehunter
I have a 265 horizon. I've noticed that if we wait more than a minute or so after that screen appears, it does the same thing you describe. It's like it goes to sleep and doesn't register the button. So maybe try watching the screen, and right as you
Electronics Forum | Thu Aug 27 14:32:34 EDT 2020 | dekhead
Following a pressure error, if continue is pressed, the next print with THE CORRESPONDING squeegee should attempt to compensate by increase or decrease in pressure (as appropriate)... Is it: 1)Not changing at all? 2)Over compensating? 3)Under compens
Electronics Forum | Mon Jan 06 16:19:32 EST 2020 | richardcargill
haven't tried the MINT as it won't let me get that far !! Swapping the Eproms with card 1 and changing the identifier will let it get to the 'Press SYSTEM key' part of the startup though, then it fails on card 1 instead of 0 so I'll give that a try i
Electronics Forum | Sat Jan 18 12:53:01 EST 2020 | vae_tva
I have a PM-570 / KP-620 that looks to be stuck in the production screen. It asks to press the start button, but when doing this nothing happens ... Can someone please help? Maybe I forget a step? When I look to the data everything looks to be OK. Fi
Electronics Forum | Tue May 05 15:12:29 EDT 2020 | electronicsprecis1
I have a Juki 740 that was working great until one day a motor cable broke and after this messege the emergency stop button has been pressed..." error popped up when I turned the machine on. I know the emergency stop works all the way. Does anyone ha
Electronics Forum | Tue Sep 01 11:53:21 EDT 2020 | inspiredmorris20
bukas, Yes, as soon as the software loads it immediately throws a 0002 (front E-stop pressed) and will not come out of EMER mode until i stop, reset, ready, on the control panel. yesterday however it also threw a E100 I/O I/F board communication d
Electronics Forum | Thu Aug 12 18:35:02 EDT 2021 | oxygensmd
Press emergency button, release it and you will get an error report. Sometimes table motor doesn't work properly on my EKRA E5 and I see where to search if something not okay. Let me know your results.
Electronics Forum | Wed Apr 03 09:12:11 EDT 2024 | hta1979
You have to enter the setup utility.Power off the machine,connect AT keyboard to the rear port, power on,press f1, load the bios setup defaults, enter the hdd parameters,in the first menu (Standard CMOS setup) (Cylinder,Head,Sector,Wprecomp) save the
Electronics Forum | Wed May 19 14:09:29 EDT 1999 | JohnW
Wendy, I've done this before using a machined piece of FR4 material to hold the board (machined like a DEK plate )in place at the press . It ensures that the boards are alway's in the right place and that none of the components are damaged..also sto
