Electronics Forum: preventive (Page 1 of 122)

Preventive Maintenance

Electronics Forum | Tue Jun 25 07:48:32 EDT 2013 | bin95

I agree with everyone else here, 3-6 months for blowing dust out of panel a bit excessive, once per year will be fine in most environments. If you find it needs to be more frequent, you need to explorer dust preventative measures. (Check panel seal,

Re: PIHR

Electronics Forum | Thu Jul 20 14:20:17 EDT 2000 | Bob Willis

In real terms the temperature compatibility is the real issue. Yes a component can and in most case will cover the paste. The component standoffs must prevent the body contacting the paste to prevent solderballing. Bob Just back from dinner, my mum

Re: My Wave Is Getting Fixed...

Electronics Forum | Fri Mar 12 08:42:53 EST 1999 | Wayne Bracy

Steve: Basic, there are 5 P's Prior Planning Prevents Poor Performance or Prior Planning Prevents Piss Poor Performance if you like 6 P's Wayne

How to prevent Bluetooth Module BGA short anybody?

Electronics Forum | Tue Dec 06 06:14:38 EST 2005 | bwet

Try using some of those new polyimide stencils. They are 8mils thick and can prevent shorting if it is due to solder mask problems or too much paste. http://www.solder.net/technical/tips.asp BWET

Reflow temperature setting

Electronics Forum | Thu Jun 08 01:52:16 EDT 2006 | ec

Hi, Is there any special temperature setting for example , bottom temp should be lower than top temp to prevent component drop. Or any information that can help to prevent component from drop off during reflow of top side.

SAWA Preventive Maintenance Check Items

Electronics Forum | Tue Oct 04 02:59:35 EDT 2016 | soldersucks

Hi There folks! Please help I would like to ask if you hava soft copy for the manual of SAWA Ultrasonic Cleaner (SC MM3-2). I will be needing it to allocate Preventive Maintenance. (hard copy went missing) Need your help.

SMT

Electronics Forum | Sun Sep 20 23:42:43 EDT 1998 | Nichol Rose

Hello: I would like to know what causes tombstombing and how can it be prevented? Thx. Nichol

Coin Cell Battery

Electronics Forum | Wed Aug 14 21:13:30 EDT 2002 | davef

Insulating tab approach, like: * Go to page 5 of http://www.kalatel.com/lit-rack/install-man/kts_253_253-16_man.pdf * http://support.tandy.com/support_radios/doc64/64039.htm * Go to �Fixing�, Step 6 of http://www.sunvic.co.uk/TLX%20Digital%20Room%2

Solder paste in Syringe vs Jar

Electronics Forum | Fri Nov 08 14:51:37 EST 2002 | davef

You should take steps to prevent paste seperation, regardless of the container type.

How to prevent defective material from getting to stock?

Electronics Forum | Thu Aug 14 14:48:27 EDT 2003 | dphilbrick

Get into the plastics business! No tin there!

  1 2 3 4 5 6 7 8 9 10 Next

preventive searches for Companies, Equipment, Machines, Suppliers & Information