Electronics Forum | Wed Oct 30 13:30:54 EDT 2019 | tnachamp
The consumables monitoring option totally disappeared from one of our printers. It used to show the level of paste, paper and solvent and now that window is totally black. I was wondering how we could get that option back onto the monitor. Thanks in
Electronics Forum | Fri Nov 01 20:24:15 EDT 2019 | dekhead
> Machine Setup >> Options >> TTG & BTG Enable
Electronics Forum | Mon Mar 16 14:58:22 EDT 2020 | tnachamp
Thank you for the response. It is strange that the TTG & BTG option is available on our other DEK but is not in this particular DEK. Both machines have the same software and version.
Electronics Forum | Fri Nov 08 11:37:44 EST 2002 | jonfox
1. Back in the early days of consumer digital cell phones, we ran into the same problem. PCB with 2000 parts in a 5"x2" area, and double sided. We ended up using our standard vacuum tooling for the NIC side and stiff ESD safe foam for the NAC side
Electronics Forum | Thu Dec 16 13:13:27 EST 2004 | Hiren
Sould anyone explain me pros and cons of stencil and screen printing and the advantages of using a screen printing over stencil printing
Electronics Forum | Thu Dec 16 15:00:20 EST 2004 | glaucon
Simple differences. Both processes require a very similar machine platform, controlled motion, vision fiducial recognition and alignment of a substrate (PCB or hybrid ceramic) to the "image", the image being either a stencil (hence stencil printing)
Electronics Forum | Mon Jul 12 21:05:06 EDT 1999 | karlin
Hi, I need some urgent informations on stencil design guidelines on how to perform epoxy printing on 0603 and 0402 components. Could anyone help? ( Reflow process is not possible because of some other constriants) Secondly, I need also facing a lo
Electronics Forum | Thu Oct 02 01:47:57 EDT 2008 | myleb
I'm new to SMT. Now, i'm making program for SPI machine to inscpect for solder paste of SP60-MU. I think this is a very good printer but some times, my program shows only 50-60% of volume transfer; and the average height is very high: nearly 200 pct.
Electronics Forum | Thu Oct 02 12:22:26 EDT 2008 | JerryS
Hello Ok there is not much info here. What you have to mae sure of is several key factors. 1. Have you entered the correct stencil thickness. 2. Are you using the stencil gerber (not the paste layer) The paste layer is usually not adjusted for ap
Electronics Forum | Thu Oct 02 17:00:44 EDT 2008 | davef
Is that accurate? If so, what are your aspect & area ratios? [Similar to the JerryS comment above.] * You say, � � and the average height is very high: nearly 200 pct.� => Our troop can make paste that height too. They snap the stencil-off a fast as
