Electronics Forum: printing consumables (Page 1 of 5)

Solder printing issues

Electronics Forum | Fri Nov 08 11:37:44 EST 2002 | jonfox

1. Back in the early days of consumer digital cell phones, we ran into the same problem. PCB with 2000 parts in a 5"x2" area, and double sided. We ended up using our standard vacuum tooling for the NIC side and stiff ESD safe foam for the NAC side

What will happen if a sloder paste is used after 24hours

Electronics Forum | Tue Jan 20 08:38:37 EST 2009 | davef

MrDif: You don't add fresh paste to used paste? We add fresh paste to used paste on the stencil to replenish the paste consumed while printing boards, so that we maintain a nice thumb-size roll of paste. We change the used paste when we clean the ste

High-speed solder paste dispensing. MY500, MY600, FX-D....?

Electronics Forum | Thu Jan 08 17:36:02 EST 2015 | jeff701

The machine supports indexing, so it'll do one part of the board, advance it to a stop, read fiducials in the second stage of the board, and then paste that section. The MY500/600 reportedly do not support this feature, though there are usually ways

CM SIC code

Electronics Forum | Wed May 07 21:16:02 EDT 2008 | davef

Standard Industrial Classification (SIC) Code are sorta pass�. In 1997, the US Census Bureau replaced SIC with NAICS (North American Industry Classification System) in the US. See http://www.census.gov/epcd/www/naics.html NAICS code 334418 Printed

support pins for double sided boards

Electronics Forum | Tue Sep 05 06:23:19 EDT 2006 | jonatf

Hi guys, I want to improve the set up of our printing machine(EKRA) especially on a 0.5mm thickness double sided boards.I find the support pins very time consuming.. any advice?? thanks.

Lower Temperature Processing- Solder Paste

Electronics Forum | Thu Feb 09 04:28:05 EST 2017 | soldertraining

Solder Pastes are used particularly in the assembly of printed circuit boards (PCBs) for a wide variety of applications, including hand-held electronic devices such as smart phones and tablets, computer motherboards, consumer electronic products, net

Stencil-less printing?

Electronics Forum | Wed Feb 28 08:04:53 EST 2018 | emeto

With saving time and space. With having the possibility to change any aperture at any time. With having the chance to apply different deposits on the same assembly or the same part. A stencil printer is not for free as well and it needs consumables t

Stenciling chipbonder.....

Electronics Forum | Wed Jan 22 21:59:54 EST 2003 | davef

First, wheat beer is not intended to be consumed at this time of the year in the northern hemishpere. It is ment to be consumed on the back porch, while smoking the LARGEST cigar you own, after mowing the lawn on a day that is so hot that the dog ca

PCBoard Marking

Electronics Forum | Wed Sep 05 12:11:03 EDT 2001 | seand

Hello Michael, Laser marking and ink jet marking are now offered by a wide array of suppliers. The was a bit of a boom at APEX last year in the number of suppliers for these systems. Many have tried label placing but have run into a number of conc

Best Jet Printer? MY600?

Electronics Forum | Wed Mar 02 02:07:06 EST 2016 | mbass

3000 components per side and yes the actual print cycle is longer (13 minutes) against the DEK print stroke of 30 seconds. But overall the whole cycle time of set up etc is way less on the MY500. The ability of the machine to adjust volume of paste o

  1 2 3 4 5 Next

printing consumables searches for Companies, Equipment, Machines, Suppliers & Information

Benchtop Fluid Dispenser

Easily dispense fine pitch components with ±25µm positioning accuracy.


Best Reflow Oven


World's Best Reflow Oven Customizable for Unique Applications
Assembly Automation Technology

ONLINE IPC Training & Certification