Electronics Forum | Tue Jan 24 20:05:24 EST 2017 | erici
we have one dot matrix printer and i would like to connect it to the TP9 machine. The parameters settings for printer is "protected" so i cannot assign the printere to the machine. How do i "unprotect" the parameter to allow me to make changes?
Electronics Forum | Thu Jan 26 11:34:47 EST 2017 | rgduval
If you're lucky, that parameter can be unlocked using the parameters password. If you're unlucky, and it can't be changed using the password, that'll mean it's hardware protected. You'll need a new magic word from Mycronic to update it. Cheers, ..
Electronics Forum | Wed Sep 19 13:43:49 EDT 2001 | jschake
I cannot report having experience with 0201 printing applications on flex circuits. Generally, I would be concerned with handling of the flex substrate. A carefully designed vacuum capable custom tooling fixture would likely be required to ensure p
Electronics Forum | Mon Sep 20 17:26:22 EDT 1999 | Earl Moon
| I've had some trouble pasting a test board for a MicroBGA trial. Most of the paste remains in the stencil apertures. | The stencil is 6 mil thick, laser cut and electo-polished. | The apertures are 12 mil in diameter with 20 mil pitch. | We are usi
Electronics Forum | Wed Oct 14 13:52:59 EDT 1998 | Bill Schreiber
Dear Sanjay, An important issue involved when stencil printing adhesives vs. solder paste is: How do you clean the stencils after printing? Do you need two machines? Two chemistries? Two waste streams? What are the potential environmental impacts an
Electronics Forum | Tue Oct 31 03:50:20 EST 2000 | JohnW
Honda, Prnting Glueisn't as difficult as it sounds, as long as you have the right stuff and a good set up. It also depend's on what your going to be placing. If your just doing 0603, 0805 and 1208 than you really only need an 8 thou or 10 thou stenc