Electronics Forum | Fri Mar 30 07:14:42 EST 2001 | pteerink
Genny, Xray systems ( or at least what I have seen ) are a manual based system. That is, you put the board on the machine and look at certain locations that you want to inspect. What we have in mind is an automated system that will catch obvious, no
Electronics Forum | Fri Mar 30 07:14:51 EST 2001 | pteerink
Genny, Xray systems ( or at least what I have seen ) are a manual based system. That is, you put the board on the machine and look at certain locations that you want to inspect. What we have in mind is an automated system that will catch obvious, no
Electronics Forum | Thu Mar 29 14:34:57 EST 2001 | Steve
The CAD data is the centroid data, x,y location. I developed an Excel macro in which we import the data as a text file and convert it to the CR Technology format. Rates for false failures varies, but is ~10 - 20%. The operators are given an oportuni
Electronics Forum | Mon Aug 24 18:45:11 EDT 1998 | Steve Evers
| We are looking at implimenting a bar code system for a SMT | production line. To start we are looking at label printer/applicators. Are there any other companies that we should consider besides Zebra and Imtec?? Thanks for your input. | John If
Electronics Forum | Fri May 04 12:28:12 EDT 2001 | slthomas
We have had some success printing 20mil pitch with our IIT Proframe. It takes some babysitting, and you don't want your operators to be changing these things out every hour or you'll be buying lots of them. Pulling tension in one direction gives r
Electronics Forum | Tue Aug 25 21:01:45 EDT 1998 | Peter
We use an Intermec 3240 Thermal transfer printer and print on polyimid label material that survives the reflow and wave solder (top side only) process without turning black. Labels run around 3-4 cents per depending on the size (We found Imtec label
Electronics Forum | Fri Aug 28 18:57:49 EDT 1998 | Mike Cleary
Selecting the correct label solution for SMT labeling is a science. Our company is a supplier of electronic identification products. Please let me know if you have questions regarding materials, printers, etc. I have been in this industry for over
Electronics Forum | Thu Aug 20 15:15:49 EDT 1998 | Wayne Bracy
| We are looking at implimenting a bar code system for a SMT | production line. To start we are looking at label printer/applicators. Are there any other companies that we should consider besides Zebra and Imtec?? Thanks for your input. | John Joh
Electronics Forum | Wed Nov 13 23:50:23 EST 2002 | iman
we changed our top/bottom clamping system in the Printer, to a side-edge clamping system. This removed the higher paste issue similar to your thread.
Electronics Forum | Fri Apr 21 00:56:44 EDT 2006 | pavel_murtishev
Good morning, MPM AP25 we have is equipped with dedicated vacuum support only, no side snuggers. Also we had a lot of issues with fine pitch paste deposition due to this poor support. Vacuum support can�t fix wrapped boards properly causing a lot of
Formed in 1989 as an advanced engineering and high mix low volume EMS services provider.
Manufacturer / Consultant / Service Provider
3240 Scott Blvd
Santa Clara, CA USA
Phone: +1 408 980 0400
