Electronics Forum | Sat Jan 26 15:47:10 EST 2019 | dfl
I'm with an annoying problem with an IV-c. Almost all the time the Y-axis "stuck" when the machine is homing. The motor tries to move the axis but only make a sound. If I move the axis by hand it can complete the homing and then goes to the IDLE. So
Electronics Forum | Sat Sep 01 06:09:25 EDT 2001 | opor_a
Hi guy Please help advise me the impact of using Nitrogen to solder bridging defect. I heard somebody said that using nitrogen can effect the bridging problem by higher surface tension in case inaccurate printing . Is it true? Thanks.
Electronics Forum | Thu Sep 06 11:17:13 EDT 2001 | Steve
I may be wrong, but I'm thinking that nitrogen has less effect on solder bridging as does the amount of solder that is present. Nitrogen allows better wetting becasue there are no oxidation effects. If you have solder bridging problems, look at the
Electronics Forum | Sat Nov 22 08:14:47 EST 2003 | davef
When the pads on the board are too large, the component tends to swim. This skewing can be a BIG problem with connectors, eh?
Electronics Forum | Mon Nov 15 23:34:53 EST 2004 | KEN
I have had this problem on tant-D's. Do a memory dump. Re-transmit status and proper. May help....may not. Also, is this the last mount?
Electronics Forum | Fri Dec 12 09:17:43 EST 2008 | lkpdsund
Problem Solved! I had copied incorrect existing shapes from our library and renamed them to the desirable shape.
Electronics Forum | Tue Aug 18 16:32:25 EDT 2009 | ldavis
Sergey, Try increasing the cool down time if that is a recipe option. We have witnessed the same effect on components that have rather slow cool down rates and were able to eliminate the problem by extending the cooling time.
Electronics Forum | Wed Aug 26 07:01:42 EDT 2009 | mysmt
Hello, Facing a problem intermittently . ERSA EWS 330 wave solder machine is restarting in continuous reset & restart mode. Next day machine works normal.
Electronics Forum | Fri Dec 10 02:49:06 EST 2010 | bagindia
we are facing vision error problem after running the machine for half an hour.Cause is x-axis motor % is changing & also motion is little harder compared with Y-axis