Electronics Forum | Thu Aug 12 06:46:35 EDT 2021 | bukas
there is no, error $0022 in technical reference. is the error you are getting a EMER level? if so there is probably a safety sensor or switch that is causing this error. $0021 is related to door switch so I would go from there. do you have technical
Electronics Forum | Thu May 11 07:19:36 EDT 2023 | richardcargill
There's a chance the vision system is seeing part of head 1 as it looks at the component. We get that with older nozzles on Philips equipment ( the black coating has worn to a silver shine ) and the component camera sees the nozzle tip, which annoyin
Electronics Forum | Fri Mar 07 10:51:58 EST 2003 | MA/NY DDave
Hi O'Conner, I hope you also tell us what Universal-GeorgeW discusses with you. It is a little strange seeing his name on this list and his phone number. Gee I can give you his email address but won't.. Again distance engineering is tough. I woul
Electronics Forum | Fri Dec 16 08:00:26 EST 2005 | jax
What you are most likely dealing with: Insufficient Pure Sn layer ( multiple causes ) Because elevated temperatures accelerate the diffusion process, the thickness of the Pure Sn layer will reduce during every thermal cycle... ( bakeing PCBs, S
Electronics Forum | Sat Dec 30 19:02:19 EST 2006 | mika
This type of component packages works best with vision type: 254 - irregular. Measure the total package length including the leads. Also set the body dimension x-y tolerances to at least 0.35mm and the the pick up x-y tolerences to 0.5mm in the part
Electronics Forum | Thu Nov 08 09:51:09 EST 2007 | rgduval
Where are the shorts occurring on the 96 pin connector? Are they consistently in the same areas? It looks as though there are a number of pins connected by traces on the board, and/or the ground plane. This would cause a lot of repeatable shorts i
Electronics Forum | Mon Sep 24 20:34:46 EDT 2012 | saduquette
Hi All, I have a Quad 4C that the quadalign processor started acting up on. Where the Hand Held Progrmmer would hang at "Laser Align Init" when you first turn the machine on. A couple of times I was able to get it running by pressing the re
Electronics Forum | Sat Jun 19 11:44:00 EDT 1999 | Vic Lau
Do anyone have any experience on assembling high frequency product, 1.8GHz or 2.4GHz. In our production line, we manufacture 1.8GHz product with using no clean paste (RMA type) for reflow and no clean wire for rework. In our functinal test,either at
Electronics Forum | Thu Mar 06 11:50:22 EST 2003 | John O'Donnell
Greetings Sir, Although I am not qualified to address the issue in detail, I do know first hand that you can obtain very comprehensive and accurate solutions and explanations from George Westby, Director, Universal Instruments Advanced Technology and
Electronics Forum | Tue Mar 11 13:35:04 EST 2003 | MA/NY DDave
Hey Neat, We share some of the same books, although I would strongly recommend he expand his collection. That Flex book is only one, the most pricey one, of many on that technology. JUST Kidding THANKS!! If we started listing all our magazine, te
.gif)
