Electronics Forum | Tue Feb 04 09:21:48 EST 2020 | nhusa
There are two areas that are important when discussing cooling rate. One is the rate thru the liquidus, where a fast rate produces small grains in the metal and a slow rate results in larger grains. Although smaller grains are stronger normal SM
Electronics Forum | Wed Jul 15 03:17:47 EDT 2020 | wellmanrau
We have been producing the SMT machines and intelligent equipment for many years, integrated Design, R&D, Production, Sales and Technical Service. What products we manufactured are: SMT Printer/Stencil Printer/Solder Paste Printer, Pick and Place Mac
Electronics Forum | Fri May 21 17:41:01 EDT 2021 | jamesatqkits
Hello, This is my first time posting to this forum, or forums in general, so go easy on me. I have just acquired a CP45FV NEO, "My other car is a CP45FV NEO" anyways, when I try to put the machine into ready mode I get the error, [0006] I/O power
Electronics Forum | Tue Jul 13 16:43:06 EDT 2021 | jseewald
Is the variation between markings human-detectable, or does the issue only crop up when you use a scanner? Different scanners can definitely have different results. Try a few models, and make sure you aren't using any damaged scanners. When you se
Electronics Forum | Mon Feb 14 21:28:52 EST 2022 | stephendo
I have used Kapton stencils before. The only issue was they don't last nearly as well as the steel ones. For rework if Circuit medic had the stencil in stock we would buy those. If not there was a stencil shop that would make them from Kapton. I do
Electronics Forum | Thu Apr 14 13:49:34 EDT 2022 | winston_one
Thank you for reply, Stephen. No, As I wrote it was leaded process. I heard that it is possible with lead free solder at higher temps an dwell time. At NPL Defect Database I've find this case wich looks exactly the same: http://defectsdatabase.npl.co
Electronics Forum | Thu May 26 07:53:42 EDT 2022 | jojoled
Hi.Thanks for reply. 1. - I guess after JETting the paste, the head will go aside, to allow head with HD camera(SPI) to do the job.....and thus if used for AOI , the same camera will be much higher above components, not damaging anything....this is
Electronics Forum | Sun Nov 06 17:52:16 EST 2022 | yannick_herzog
Hello, we mark our PCBs with a data matrix code using an INSIGNUM Laser 4000 from ASYS. This DMC is read at each machine for traceability. Also on our Fuji AIMEX IIIc pick-and-place machines. Unfortunately, we always have problems with the recognit
Electronics Forum | Thu Jun 01 00:20:25 EDT 2023 | ultraview
We are using a Kayo-A4 SMT machine and are running across software bugs we can't seem to work around. Video here: https://youtu.be/PSobXzTtcH0 I push next and the camera goes to the correct location for part J2. Then I push test and the part is picke
Electronics Forum | Tue Jun 06 00:53:55 EDT 2023 | frankchan
Hi Rob, my previous offer to you assumed you would stick with Yamaha, if others suit you then we could also supply. If Why no one recommends Samsung/Hanwha you ask, from the seller's point of view, Samsung's market is majorly in China, with about 2~3
