Electronics Forum | Thu Jul 01 21:50:32 EDT 1999 | Big K
I am currently looking into ways to decrease SMT changeover times. I work in a high mix-low volume factory. We use Fuji CP's and IP's for SMT production. I would appreciate hearing from anybody that has some proven methods for reducing setup/changeov
Electronics Forum | Tue Feb 09 16:04:06 EST 2010 | frankalbiter
Hi there, From the ISO 13485: 2003 std. standpoint, there is a special requirement which states: "The following requirements shall apply. d) If appropriate, special arrangements shall be established and documented for the control of contaminated or
Electronics Forum | Tue Feb 22 10:32:10 EST 2005 | ptavernier
How do you identifie your future products ? By part-numbers or date code ? Add a letter ? Add labels ? Thank's for your response.
Electronics Forum | Tue Feb 22 12:05:27 EST 2005 | russ
We use the e1 designation/marking on either a label or inbedded in the PCB.
Electronics Forum | Tue Feb 22 12:41:57 EST 2005 | Indy
we use a "+" sign next to the model name. Either embedded Or printed. Cheers Indy
Electronics Forum | Fri Jul 02 00:33:57 EDT 1999 | Scott
50% reduction in time. One draw back, the availability of feeders... You need 280 feeders max to change over a max capacity of 140 feeder machine (or a variance of a product mix vs. part numbers); then there's 8mm, 12mm, 16mm, sticks feeders that c
Electronics Forum | Tue Feb 09 16:31:37 EST 2010 | jax
Basically it states that you cannot have Field Returns in the same area as Work In Process. You must have a way to clearly identify and seperate the two different types of product... In your ERP/MRP/ShopFloor/etc... as well as physically. The preferr
Electronics Forum | Fri Jul 02 07:55:52 EDT 1999 | Earl Moon
50% reduction in time. One draw back, the availability of feeders... You need 280 feeders max to change over a max capacity of 140 feeder machine (or a variance of a product mix vs. part numbers); then there's 8mm, 12mm, 16mm, sticks feeders that c
Electronics Forum | Wed Feb 10 13:47:39 EST 2010 | davef
At a previous employer, we made a wearable medical device. When a customer finished using the device, she/he returned it to the company. Then, the company refurbished the device and rented it to other customers. Before it could be refurbished, it ne
Electronics Forum | Sat Jul 03 01:09:29 EDT 1999 | DEAN
| | I am currently looking into ways to decrease SMT changeover times. I work in a high mix-low volume factory. We use Fuji CP's and IP's for SMT production. I would appreciate hearing from anybody that has some proven methods for reducing setup/chan
.gif)
