Electronics Forum | Sun Feb 06 15:38:39 EST 2005 | Grant
Hi, I think we would get a jam up every hundred parts or so, and it's worse in cover tape that's glued down. The problem is the Agillis feeders push the cover tape to the side, which works ok on 8mm tapes, but on wider 12 and 16 mm tapes it's a nigh
Electronics Forum | Tue Jan 25 09:01:02 EST 2005 | Marc C
Hi All I work for the supplier mentioned above and just want to pass along some info. OmniFlo ovens use to have timers. They were located at in the electrical box and not in the software but a "mechanical" timer. These were removed from the ove
Electronics Forum | Mon Jan 24 22:28:57 EST 2005 | davef
In addition to the potential problems you mentioned, add: * Barrel cracking of PTH and via. * Lifted pads. * Warped boards. And the reason you're not using a solder fountain to to solder this connector is? Or use an old trick we've done here on SMT
Electronics Forum | Sat Jan 29 08:46:20 EST 2005 | davef
The RoHS Directive complements the WEEE Directive. * Restriction of Hazardous Substances in Electrical and Electronic Equipment (RoHS) Directive [2002/95/EC] affects manufacturers, sellers, distributors and recyclers of electrical and electronic equ
Electronics Forum | Wed Jul 06 09:51:23 EDT 2005 | Jack
Doug, It always seems easier to fix one or two problems by eye at the time. The real problem comes when the customer wants the same board run again later. You're okay if you saved the corrected placement routine, but if you end up moving the job t
Electronics Forum | Fri Feb 04 08:15:02 EST 2005 | aj
We are starting to look at doing some trials at the mo. I have attended a couple of seminars with one on Wave Soldering coming up soon.Loads of info. now have to make sense of it all. Just a couple of questions/advise on how other people have approa
Electronics Forum | Tue Feb 08 22:37:03 EST 2005 | davef
Your company has chosen to define its requirements for tracebility as it has. So, people there should be able to help you understand their purpose and intent. For instance: * We distinguish between 'repair' and 'rework'. Repair requires a MRB ac
Electronics Forum | Sun Feb 27 17:50:48 EST 2005 | pmdeuel
I think he should go to the manufacturer of the most complicated machine in your company. Example if your company has HSP, GSM, and MyDatas then he probably should look at Universal. Although having been taught on a Universal HSP he may have difficul
Electronics Forum | Wed Feb 09 10:32:49 EST 2005 | primus
Hello there! I am familiar with the Set Command Variables available on our older UIC through-hole machines, and am investigating the possibility of making these variables available to our operators. Over the past years, our operators have been train
Electronics Forum | Fri Feb 11 00:22:05 EST 2005 | Grant
Hi, That's what I am thinking, and we might have a dirty stencils and cannot see the problem. We are going to get a magnifier, and check it out. I did not think the stencil could bur, but I didn't want to shoot the guys down when they had an idea on
