Electronics Forum | Thu Mar 21 08:29:27 EST 2002 | PeteC
Don't forget Mydata, the Swedes that dominate the lower end and flex placement market now. Yeah, many bought the Omni from old UIC but what did they develop? "Support", the equip mfg?s are suppose to support the customer. UIC got a lot of good constr
Electronics Forum | Wed Mar 27 10:56:04 EST 2002 | gregp
Alas we as Americans are destined to be innovators and consumers. However, we do not consume what we innovate. We wait for the Euro and Japanese conglomerates to take our ideas, mass produce them, and then sell them back to us. They are fueled by
Electronics Forum | Wed Mar 27 01:06:12 EST 2002 | ianchan
Hi Guys, We are using two types of support Jigs for our PCB boards, during the paste printing, chip shooter, and IC mounting. The two types of support Jigs are : 1) "self-fabricated" aluminium support Blocks 2) "off shelf purchased" support Pins T
Electronics Forum | Wed Mar 27 21:20:30 EST 2002 | davef
There is two major BGA coating camps. * Camp #1: "We require the coating to be under low stand-off devices but with no filleting. So we apply a thinned dip coat first, and then top-off with a proper spray coat" * Camp #2: "We want no coating under th
Electronics Forum | Fri Mar 29 09:08:03 EST 2002 | caldon
Barcode!! The Siemens machines can have bar code Options added.On the Siemens Machines the bar code S/W is a little archaic. In theory You would have a bar code on a reel of part and a barcode on the feeder location (They are the black codes on the s
Electronics Forum | Tue Apr 09 16:25:28 EDT 2002 | clarkk
Alan, You're right, mass inspection after assembly won't work. The inspectors will miss 25% (or more) of the defects, and the boards will be reworked before SMT operators can properly define defects and their sources. The company I work for tends to
Electronics Forum | Thu Apr 11 18:26:30 EDT 2002 | TomN
I know the information is out there somewhere, but I need to find information on cost models that apply to reworking motherboards. I had this task dropped in my lap and I�m trying to turn this around quickly. Some background: Products that are diag
Electronics Forum | Tue Apr 16 20:55:49 EDT 2002 | lysik
I do think that people should have to pay a registration fee. It costs a lot of money to run a company like Universal. R&D, help dest etc. They deserve to turn a profit. I also think Universal makes great machines. I am probably their biggest fan. So
Electronics Forum | Mon Apr 22 18:40:14 EDT 2002 | Steve Townsend
It's not impossible to balance in a non-repetitive situation. You'll need to investigate mix-model JIT methods. It takes more effort, but it is very possible. First is to figure out which assemblies are going to be the most similiar, which ones use
Electronics Forum | Mon Apr 22 20:55:00 EDT 2002 | ianchan
Hi, this is not really a technical solution, just a feedback. we too have a model series using the same WS paste type. it gives a dull solder joint with white residue that can be marginally removed after post-DI water rinse (ie. not 100% removed).